Cart 2 india

Specification
Brand : HARFINGTON
BulletPoint1 : Size - Inner Girth: 1067mm / 42"; Outer Girth: 1135mm / 44.69"; Top Width: 17mm / 0.67"; Thickness: 11mm / 0.43"
BulletPoint2 : Rubber Belt - Polyester wires are embedded in the rubber for strength, bending resistance and uniform load. Neoprene rubber has good resistance to oil, heat and wear.
BulletPoint3 : Features - To link two or more rotating shafts to transmit power in a drive system. Even load distribution on belt drives and good wear resistance.
BulletPoint4 : Applications - For all general drives for drive systems of lawn mower, tractor, snow blower, bandsaw, drill press, box fan, trimmer, etc.
BulletPoint5 : Note - Confirm the Size before ordering. Accurate measurement of v-belt length should be done with a belt measuring tool or a soft ruler, not a steel ruler. The width and thickness of the belt should also be measured to confirm the type of belt.
Color : Htd440 5m
CompatibleDevices : Lawn Mower
CompatibleDevices1 : Motorcycle
CompatibleDevices2 : 3D Printer
ExternallyAssignedProductIdentifier : 7610575179884
ExternallyAssignedProductIdentifier1 : 072053564617
ExternallyAssignedProductIdentifier2 : 0072053564617
ExternallyAssignedProductIdentifier3 : 00072053564617
ItemName : HARFINGTON 2pcs B-1067 V-Belts Drive Belt 1067mm(42") Inner Girth 17mm Top Width B Section Rubber for Power Transmission
ItemPackageDimensions_Height : 15.7 centimeters
ItemPackageDimensions_Length : 6.7 centimeters
ItemPackageDimensions_Width : 15.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-v-belts
Manufacturer : HARFINGTON
Material : Neoprene
ModelNumber : a19111100ux1724
NumberOfItems : 2
PartNumber : hta221123hh0760
ProductDescription : V-Belts are the most common type of drive belt used for power transmission. They provide the best combination of traction, speed transfer, load distribution, and extended service life.
Made of neoprene rubber material, high-temperature resistance, wear resistance, corrosion resistance, high coefficient of friction. The outside fabric wrap is treated with high oil and heat resistant.
Fit for many industrial applications, agricultural machinery, engineering machinery, etc.
Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys and shaft too great.
How to measure the length of the required belt:Wrap the rope around the two pulleys
Make a mark
Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt

ProductSiteLaunchDate : 2023-03-18T08:44:37.738Z
Size : 1067mm
StreetDate : 2017-05-15T00:00:01Z
Style : L
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 26111800