Cart 2 india

Specification
Brand : HARFINGTON
BulletPoint1 : Size - Model: A737; Inner Girth: 737mm; Top Width: 13mm; Thickness: 8mm
BulletPoint2 : Rubber Belt - Polyester steel brown wires are embedded in the rubber for strength, bending resistance and uniform load. Neoprene rubber has good resistance to oil, heat and wear.
BulletPoint3 : Features - To link two or more rotating shafts to transmit power in a drive system. Even load distribution on belt drives and good wear resistance.
BulletPoint4 : Applications - For all general drives for drive systems of lawn mower, tractor, snow blower, bandsaw, drill press, box fan, trimmer, etc.
BulletPoint5 : Note - Confirm the Size before ordering. Accurate measurement of v-belt length should be done with a belt measuring tool or a soft ruler, not a steel ruler. The width and thickness of the belt should also be measured to confirm the type of belt.
Color : green
CompatibleDevices : Lawn Mower
CompatibleDevices1 : Print
CompatibleDevices2 : Vacuum Cleaner
CompatibleDevices3 : Treadmill
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 840593140062
ExternallyAssignedProductIdentifier2 : 0840593140062
ExternallyAssignedProductIdentifier3 : 00840593140062
IncludedComponents : Belt
ItemName : HARFINGTON 2pcs A-737 V-Belts Drive Belt 737mm Inner 13mm Width 8mm Thickness Girth Rubber for Power Transmission
ItemPackageDimensions_Height : 2.17 inches
ItemPackageDimensions_Length : 5.91 inches
ItemPackageDimensions_Width : 5.91 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-v-belts
Manufacturer : HARFINGTON
Material : Rubber
Material1 : Rubber
Material2 : Polyester
ModelNumber : 89-MXL-025
NumberOfItems : 2
PackageLevel : unit
PartNumber : hta221011hh0084
ProductDescription : V-Belts are the most common type of drive belt used for power transmission. They provide the best combination of traction, speed transfer, load distribution, and extended service life.
Made of neoprene rubber material, high-temperature resistance, wear resistance, corrosion resistance, high coefficient of friction. The outside fabric wrap is treated with high oil and heat resistant.
Fit for many industrial applications, agricultural machinery, engineering machinery, etc.
Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys and shaft too great.
How to measure the length of the required belt:Wrap the rope around the two pulleys
Make a mark
Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt

ProductSiteLaunchDate : 2022-11-18T03:45:08.293Z
Size : 737mm
StreetDate : 2017-03-12T00:00:01Z
Style : 0.25 inch
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 26111800