Cart 2 india

Specification
Brand : Gates
BulletPoint1 : Suitable for all industrial applications, including v-flat drives
BulletPoint2 : Gates curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life
BulletPoint3 : Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
BulletPoint4 : The Flex-Weave Cover is a patented fabric construction for longer cover life, providing extended protection to the belt core from oil, dirt and heat
BulletPoint5 : Meets or exceeds RMA standards for static conductivity and oil and heat resistance
Color : Black
CompatibleDevices : Industrial Equipment
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 072053019483
ExternallyAssignedProductIdentifier2 : 0072053019483
ExternallyAssignedProductIdentifier3 : 00072053019483
GpsrSafetyAttestation : 1
IncludedComponents : Gates B63 Hi-Power II Belt
ItemName : Gates B63 Hi-Power II Belt
ItemPackageDimensions_Height : 67.7926 centimeters
ItemPackageDimensions_Length : 2.794 centimeters
ItemPackageDimensions_Width : 23.0124 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-v-belts
Manufacturer : Gates
Material : Metal
ModelNumber : B63
NumberOfItems : 1
PackageLevel : unit
PartNumber : B63
ProductDescription : DescriptionsV-belts are the most common type of drive belt used for power transmission. The V-shaped ribs increase the contact area between the belt and pulleys, they provide the best combination of traction, speed transfer, load distribution, and extended service life.
The multi-rib belt offers the flexibility of a flat belt while delivering the high power transmission performance of a traditional V-belt.
Made of EPDM rubber material, high-temperature resistance, oil resistance, wear resistance, and high coefficient of friction.
Fit for many industrial machinery, appliances, and power tools, such as small compressors, pumps, drills, and saws.
Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys, and shaft too great.
How to measure the length of the required belt?Wrap the rope around the two pulleys
Make a mark
Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt

ProductSiteLaunchDate : 2007-12-02T00:00:00-00:00
Size : 260J8
StreetDate : 2017-07-20T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111800