Cart 2 india

Specification
Brand : D&D PowerDrive
BulletPoint1 : Country of Origin : China
BulletPoint2 : The belts exceed USA RMA published ratings levels
BulletPoint3 : They are designed to perform at the identical or higher level than all other major USA manufacturer's belts of the same Type
BulletPoint4 : Package Dimensions: 12 L x 12 W x 3 H (inches)
BulletPoint5 : Note - Confirm the Size before ordering. Accurate measurement of v-belt length should be done with a belt measuring tool or a soft ruler, not a steel ruler. The width and thickness of the belt should also be measured to confirm the type of belt.
Color : Black
CompatibleDevices : Car
CustomerPackageType : Standard Packaging
ItemName : D&D PowerDrive B59/5L620 Thermo King Replacement Belt, B/5L, 1 -Band, 62" Length, Rubber
ItemPackageDimensions_Height : 24.003 centimeters
ItemPackageDimensions_Length : 5.5118 centimeters
ItemPackageDimensions_Width : 22.9108 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-v-belts
Manufacturer : OffRoad Belts
Material : Rubber
Material1 : Rubber
Material2 : Polyurethane (PU)
ModelNumber : B59/5L620
NumberOfItems : 1
PartNumber : B59/5L620
ProductDescription : V-Belts are the most common type of drive belt used for power transmission. They provide the best combination of traction, speed transfer, load distribution, and extended service life.
The surface of EPDM has high strength resistance, which can improve the strength of the belt and disperse the stress generated on the surface of the belt during work, thus reducing the cracks on the surface of the belt, further increasing the service life and reducing the cost of use.
Fit for many industrial applications, agricultural machinery, engineering machinery, etc.
Proper belt tension and pulley alignment should be maintained during operation. Too little tension may cause slippage and wear on the belt and pulleys; too much tension makes the stress on the belt, pulleys and shaft too great.
How to measure the length of the required belt:Wrap the rope around the two pulleys
Make a mark
Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt

ProductSiteLaunchDate : 2016-11-09T08:00:01.000Z
Size : 725mm
StreetDate : 2017-03-12T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1