Specification Brand : Saelno BulletPoint1 : Pulley outside diameter:12.25 inch,1 Groove. BulletPoint10 : Pin Diameter:0.5625 BulletPoint2 : Applicable shaft diameter:1 inch,Standard Keyseats(1/4X1/8) BulletPoint3 : Standard V-Belt Sheave: For V-Belt Section A,AX,3L,4L BulletPoint4 : Sheaves are accurately machined from fine grained cast lron Statically balanced, Surface anti rust spraying,Screws quantity:2 BulletPoint5 : This V-Groove Drive pulley is a general Sheave for power transmission, which is applied to compressors, motors, table saw and other power transmission devices.The pulley is formed through casting, using material that meets the American standard ASTM G3000 BulletPoint6 : Pulley Style:V-Belt BulletPoint7 : Built Standard: Built with high standard and care to meet industry standards for quality control, ensuring reliable and consistent performance BulletPoint8 : Outside Diameter:7.9 BulletPoint9 : Overpin Diameter:7.65 IncludedComponents : powersports-kidney-belts ItemName : Saelno AK124-1 Single Groove Sheaves,v Belt Pulley 1 inch bore 12.25" OD,Motor Pulley Cast Iron for A AX 3L 4L V-Belts,AK124X1 Pulley ItemPackageDimensions_Height : 1.78 inches ItemPackageDimensions_Length : 12.5 inches ItemPackageDimensions_Width : 12.5 inches ItemPackageQuantity : 1 ItemTypeKeyword : v-belt-pulleys Manufacturer : Saelno Material : Cast Iron ModelName : powersports-kidney-belts ModelNumber : AK124-1 NumberOfItems : 1 PartNumber : AK124-1 ProductDescription : This V-Groove Drive pulley is a general Sheave for power transmission, which is applied to compressors, motors, snow blowers and other power transmission devices.The pulley is formed through casting, using material that meets the American standard ASTM G3000, resulting in a product that is sturdy and durable.Sheave is precision-processed through CNC to achieve high accuracy in all dimensions. Its surface is coated with a layer of gray electrophoretic paint, providing excellent rust resistance.There is a hub, with two screw holes on it. One is above the keyway, and the other is at a 90° position. Inside are two screws used to fix the shaft.The pulley has undergone static balance treatment, making it run more smoothly during the transmission process ProductSiteLaunchDate : 2024-10-30T16:17:59.175Z PulleyType : v_belt SupplierDeclaredDgHzRegulation : not_applicable SupplierDeclaredHasProductIdentifierExemption : 1 UnspscCode : 26111800 WarrantyDescription : 12 Months