Specification Brand : CHANCS BulletPoint1 : Description:The inner hole of the pulley is accurate in size, formed with one knife, runs smoothly, and has high concentricity.Suitable for round belts, large contact area, non-slip and more durable. BulletPoint2 : Specification:Outer Diameter:40mm,Inner Diameter:12mm,Overall Thickness: 17.5mm,Step diameter: 16mm ,Step thickness: 7.5mm,Groove Bottom Diameter:30mm,Groove Width:7mm,Groove Depth: about5mm,Applicable Belts:6mm belt. BulletPoint3 : Package Content: 1×Pulley BulletPoint4 : Application:Mainly used in motor, mini spindle, model transmission design, motor shaft transmission, etc. BulletPoint5 : Attention:Pulleys with an outer diameter of 16mm and pulleys with other specifications are not suitable for use together. Pulley selection: first measure the diameter of the shaft to be installed, such as the shaft diameter of 8mm, and the pulley with an inner diameter of 8mm. This size will not be large or small, and the installation is just right. BulletPoint6 : Package Contents:1 x Roller Chain Sprocket,2 x Screws,1 x Wrench Color : Single Groove Pulley ExternallyAssignedProductIdentifier1 : 698672150972 ExternallyAssignedProductIdentifier2 : 0698672150972 ExternallyAssignedProductIdentifier3 : 00698672150972 IncludedComponents : NO ItemName : CHANCS Outer Diameter 40mm Single Groove Pulley 12mm Fixed Bore Pulley for Drilling Machine 6MM PU Round Belt ItemPackageDimensions_Height : 2 inches ItemPackageDimensions_Length : 3.1 inches ItemPackageDimensions_Width : 3.1 inches ItemPackageQuantity : 1 ItemShape : Round ItemTypeKeyword : v-belt-pulleys Manufacturer : CHANCS MOTOR Material : Cast Iron MaximumRotationalSpeed : 5890 rpm ModelNumber : Single Groove Pulley NumberOfItems : 1 NumberOfTeeth : 21 PartNumber : BP02240072512 ProductDescription : Description: The inner hole of the pulley is accurate in size, formed with one knife, runs smoothly, and has high concentricity.Suitable for round belts, large contact area, non-slip and more durable.
Application: Mainly used in motor, mini spindle, model transmission design, motor shaft transmission, etc.
Attention: Pulleys with an outer diameter of 16mm and pulleys with other specifications are not suitable for use together. Pulley selection: first measure the diameter of the shaft to be installed, such as the shaft diameter of 8mm, and the pulley with an inner diameter of 8mm. This size will not be large or small, and the installation is just right.