Cart 2 india

Specification
Brand : hokojix
BulletPoint1 : LD06AJSA / B is a current regulation integrated circuit operating from an input of 2.8 V to 6 V, the constant output current can be set to 1.5A with an external resistor. the LD06AJSA / B consists of high reference, amplifier, current. The power and current block significantly reduce the number of external components, which makes the LD06AJSA / B for ideal for LED driver.
BulletPoint2 : This feature allows users to maximize the use of the power handling ability of the chip, do not worry about the chip overheating and damage to the chip or external components.
BulletPoint3 : The LD06AJSA / B also has the function of allowing the chip, which can the whole chip to limit the shutdown current consumption within 1uA.
BulletPoint4 : The LD06AJSA / B also adopts the current overload for block. When the current LED 1.9A approaches (Typical), the on the current block for starts the function to the current LED from increasing.
BulletPoint5 : Application 1: Wiring according to the following figure, use a suitable screwdriver carefully and slowly rotate the adjustable resistance.
Color : Green
ExternallyAssignedProductIdentifier : 7643130499011
FitType : Universal
ItemName : hokojix for 2.8-6V 30-1500MA 1.5A LED Driver Control Board Module Adjustable
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : varactor-diodes
Manufacturer : hokojix
Material : Circuit board + electronic components
ModelName : CEGQOXSH
ModelNumber : CEGQOXSH
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : hokojix
ProductDescription : Description:
LD06AJSA / B is a current regulation integrated circuit operating from an input of 2.8 V to 6 V, the constant output current can be set to 1.5A with an external resistor. the LD06AJSA / B consists of high reference, amplifier, current,. The power and current block significantly reduce the number of external components, which makes the LD06AJSA / B for ideal for LED driver.
When the pin is high, the input is greater than 2.8 V, and is than the direct the required drop, LD06AJSA / B normally operates to provide constant current from the PULLOBEE. The LD06AJSA / B adopts temperature regulation instead of temperature for function, the temperature regulation can cause the LEVOU to be continuously in for case of high temperature or fall. When the LD06AJSA / B temperature junction reaches about 135 ° C, the internal temperature setting of reduces the current so that the temperature of the LED junction will not rise. this feature allows users to maximize the use of the power handling ability of the chip, do not worry about the chip overheating and damage to the chip or external components.
The LD06AJSA / B also has the function of allowing the chip, which can the whole chip to limit the shutdown current consumption within 1uA.
The LD06AJSA / B also adopts the current overload for block. When the current LED 1.9A approaches (Typical), the on the current block for starts the function to the current LED from increasing.
Application 1: Wiring according to the following figure, use a suitable screwdriver carefully and slowly rotate the adjustable resistance.
the frequency of the must be less than 2 KHz
ProductSiteLaunchDate : 2024-09-24T10:35:59.241Z
Size : As pictures shown
UnitCount : 1
UnspscCode : 52140000