Cart 2 india

Specification
AirFlowCapacity : 200 liters_per_minute
Brand : DIY Pond Aeration
BulletPoint : Commscope Andrew Dryline Dehydrator Repair parts Gast K806 Rebuild Kit Fits Aeration Pump models G25 RP25 Restores your pump to original specs once correctly installed.
BulletPoint1 : Custom Fit: The Vacuum Pump Coupling Sleeve is For Platinum & For Eliminator DV42N, DV-85N, DV-142N, DV-200N, DV-285N, DV-3E, DV-4E and DV-6E Vacuum Pumps.
BulletPoint2 : Premium Quality: The Vacuum Pump Coupling Sleeve is made from High Performance Polyurethane, good abrasion resistance and strength, good shock absorption, has long service life
BulletPoint3 : Good Function: Ensures excellent transmission efficiency when connecting to the vacuum pump, guaranteeing a highly efficient system operating. Rigorously inspected and tested, this vacuum pump coupler sleeve is designed to desirably fit, serving as an ideal replacement for original parts
BulletPoint4 : Easy to install: Conform to the design and dimensions of original components, Ideal replacement for the old or broken one.
BulletPoint5 : Parcel List: 1Pcs Vacuum Pump Coupling Sleeve
Color : Yellow
ExternallyAssignedProductIdentifier : 7341568220800
IncludedComponents : Gaskets, Cup Seals, Cylinder Sleeves.
ItemName : 74R air Pump Rebuild Kit. Fits CommScope PMT200B. Complete Basic Overhaul Kit PMT200B-KIT-OVRHL Andrew Dryline Dehydrator Overhaul Kit for Gast K806 74r Compressor. SK7806D
ItemPackageDimensions_Height : 5 millimeters
ItemPackageDimensions_Length : 5 millimeters
ItemPackageDimensions_Width : 5 millimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-pumps
Manufacturer : DIY Pond Aeration
MaximumPower : 1100 watts
ModelName : Oilless Diaphragm Vacuum Pump, 1100W 200L/min Electric Compressor Head Small Air Mute Motor Count 7CFM Oil Free Mute Vacuum Pump for Blister Molding, Hydraulic Presses, Food Processing and Packaging
ModelNumber : AXAUCHOZ
NoiseLevel : 14 decibels
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : RPGH74R
PowerSourceType : Corded Electric
ProductDescription : Air Pump repair kit for all Gast models starting with the numbers 74R. Also fits CommScope Andrew Dryline Dehydrator Compressor Rebuild kit for Gast 74 Model Compressors as pictured. This is for a top end rebuild kit / overhaul kit that includes: 1 Piston Cup Seal, 1 Head Gasket, Cylinder Sleeve, 2x Flapper Valves, & 1 Cylinder Sleeve O-ring. DOES NOT include the compressor or any other parts, fittings, filters, etc. Parts Replacement and Dehydrator Overhaul COMMSCOPE dehydrators are designed to give many years of trouble-free service and require very minimal maintenance. The dehydrator contains, as a standard feature, an electronic hour meter that records compressor run hours. To ensure continuous and reliable operation, the dehydrator must be overhauled every 6000 hours of compressor operation. The overhaul kit, listed below, contains all of the necessary parts to perform this overhaul. The dehydrator overhaul kit includes parts to overhaul the compressor and critical components in the dehydrator that often become worn over time. Tools The following tools are used in the maintenance and overhaul procedures. Adjustable open-end wrench Allen wrench 5/32 #2 Phillips screwdriver Small flat-blade screw-driver Unit Shutdown and Removal In order to perform an overhaul, the unit must be turned off, power removed and removed from service. As this is being done, the low pressure alarm may active through a reporting alarm system. Personnel monitoring such an alarm should be notified in advance so that they are aware of the fact that service is being performed. It is also necessary to disconnect the dehydrator dry air output from the waveguide system during the overhaul. Remove the compressor for overhaul To remove the compressor, open the cover panel of the unit. 1. Disconnect the compressor wiring (6-pin connector) from control board. 2. Disconnect the tubing from the output of the compressor. The tubing and hose clamp can be discarded as replacements are provided in the compressor overhaul kit. 3. Remove the four compressor screws from the bottom and front of the dehydrator. Remove the compressor from the chassis. Remove the brackets that cover the compressor head. Service Restoration RECOMMENDATION: If the dehydrator overhaul process has taken more than a few hours, it is recommended that the unit be run for one hour without being connected to any closed air volume in order to purge the membrane dryer and tank of any accumulated moisture. If the transmission lines have been exposed to ambient air and/or have not retained their system pressure, it is also recommended that the lines be purged.
ProductSiteLaunchDate : 2025-01-30T16:01:29.795Z
RecommendedUsesForProduct : Blister Molding, Plastics, Hydraulic Presses, Food Processing and Packaging, Fully Automatic Laminating Machine, Semiconductor LED Measuring Machines, Dental Medical Tables, Electronics Industry
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40151500
Voltage : 110 volts