Cart 2 india

Specification
AutomotiveFitType : vehicle_specific_fit
Brand : DIY Pond Aeration
BulletPoint : Replacement Piston Cup and Sleeve for the 1/4hp compressor models shown in picture 2. Includes ONLY 1 piston cup and 1 cylinder sleeve Save $$ by replacing on the 2 main wear parts. Does NOT include any other parts, pieces, gaskets, or the pump itself.
BulletPoint1 : High Performance: This micro vacuum pump has a suction of 5L/min, a vacuum degree of 65kPa, a maximum pressure of 120kPa, low noise, low power consumption, and is particularly suitable for high negative environmental needs.
BulletPoint2 : Wide Application: This micro vacuum pump is suitable for electrical products, industrial products, vacuum preservation machine, gas conversion and emission device, gas analysis and sampling, instruments and other fields.
BulletPoint3 : Working Principle: Compress the air with a fixed volume in the pump chamber (compression suction port close, slight open positive pressure at the port), stretch (compression port close, negative pressure suction port open). Under a pressure difference
BulletPoint4 : DC Motor Drive: The negative pressure vacuum pump is driven by miniature DC motor, which drives the internal mechanical eccentric motion. The eccentric motion drives the internal reciprocating motion of the diaphragm.
BulletPoint5 : Convenient and Practical: The oilless vacuum pump does not pollute the medium, requires no maintenance, can work continuously for a long time, which is stable and . Equipped with bracket for easy fixation.
Color : Black
FitType : Vehicle Specific Fit
IncludedComponents : Cup Seal, Cylinder Sleeve.
IsAssemblyRequired : 1
ItemName : 1/4HP Piston Compressor Rebuild Service Kit Cup Seal & Sleeve Only. Fits MATA MPC-60, Kasc KM-60C, Easy Pro ERP25 Models. ERP25K KM-60RK ASYAS001
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : science-lab-pumps
Manufacturer : DIY Pond Aeration
Material : Cast Iron
ModelName : Oil Mist Filter
ModelNumber : Marhynchusp8bgd9eai1
NumberOfItems : 1
PartNumber : RMPC60CUPSL
ProductDescription : This is for a Replacement Piston Cup and Sleeve for the 1/4hp compressor models shown. This will restore your compressor to working pressures. 99% of the time the cup seal is the culprit for loss of pressure / no bubbles on a diffuser. Replacing the piston cup corrects this. The sleeve can wear causing premature failure on the cup seal also so we include a sleeve as well. Replace the Main Wear Parts! NOTE** the New Style cup seal is black as opposed to the tan colored original. The Black cup seals are designed to last much longer than traditional Tan colored ones.
ProductSiteLaunchDate : 2025-02-24T15:53:13.146Z
Size : 7.7cmx9.3cm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 25170000
WarrantyDescription : 6 Months