Specification Brand : SP Scienceware BulletPoint : Glass Vacuum Desiccator 8" (210mm) BulletPoint1 : Holds a full vacuum (29.9" Hg 75.9cm) at room temperature for 24 hours; will remain airtight even if not under vacuum BulletPoint2 : Polypropylene stopcock with PTFE plug accepts 6.4mm (¼") I.D. tubing and allows a controlled entrance of air preventing unnecessary turbulence BulletPoint3 : ‘Flat Dome,’ clear polycarbonate top with large ribbed knob maximizes interior clearances and provides an average of 13% greater interior volume over standard hemispherical domes BulletPoint4 : All models include a 0.32 cm (⅛") thick perforated plate; disposable or reusable desiccant can be placed on or under this plate BulletPoint5 : Clear polycarbonate top on a bottom that is either clear polycarbonate or chemical-resistant white polypropylene Capacity : 0.09 cubic_feet Color : White ControlMethod : touch CustomerPackageType : Standard Packaging ExternallyAssignedProductIdentifier1 : 0656588583260 ExternallyAssignedProductIdentifier2 : 656588583260 FormFactor : Cannister IncludedComponents : Perforated plate, stopcock with PTFE plug IndoorOutdoorUsage : indoor IsElectric : 1 ItemName : SP Bel-Art "SPACE SAVER" Polycarbonate Vacuum Desiccator with White Polypropylene Bottom; 0.09 cu. ft. (F42010-0000) ItemPackageDimensions_Height : 18.5 centimeters ItemPackageDimensions_Length : 14.8 centimeters ItemPackageDimensions_Width : 18.1 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : science-lab-vacuum-desiccators Manufacturer : Bel-Art Products Material : Polycarbonate with White Polypropylene Bottom ModelName : F42010-0000 ModelNumber : 420100000 NumberOfBoxes : 1 NumberOfItems : 1 PackageLevel : unit PartNumber : 420100000 PowerSourceType : Corded Electric ProductDescription : These desiccators are made of polypropylene and polycarbonate. These auto-clavable vacuum desiccators can hold vacuum upto 740 mm of Hg for 24 Hours without any greasing. The top dome, molded in rigid and transparent polycarbonate, gives a crystal clear view of the desiccant placed inside. The knurled knob on the top provides easy handling of the dome. The lower part is made of polypropylene. An internal groove is provided on the flange to hold a silicon rubber O-Ring. The polypropylene stopcock is fitted with a self lubricating PTFE plug. This plug works three way i.e. vacuum creation, shutting off & vacuum releasing. ProductSiteLaunchDate : 2008-08-01T00:00:00-00:00 RecommendedUsesForProduct : Laboratory, Classroom SeriesNumber : 42010 Size : 0.09 cu. ft. StreetDate : 2018-02-22T00:00:01Z Style : Polypropylene SupplierDeclaredDgHzRegulation : not_applicable SurfaceRecommendation : Various surfaces (hard floors, bare floors, heat-resistant surfaces) UnitCount : 1 Voltage : 240 volts Wattage : 2000 watts