Cart 2 india

Specification
Brand : JMT
BulletPoint1 : Expansion Interface: USB3.2GEN2 Type-A+USB-C. Bus Type: PCI-E rev2.0, Dual Channel x2, Serial ATA rev3.1 Gen2.
BulletPoint2 : Product Rate: 10Gbps+10Gbps. total 20Gbps bandwidth. Support chassis: 4U large chassis, 2U small chassis are available
BulletPoint3 : Hot-swap feature allows connecting/disconnecting devices without powering down the system.
BulletPoint4 : System: Compatible with WIN7(need to install the driver), WIN10, WIN11, LINUX. Suggested for 10 or more systems.
BulletPoint5 : Warm Tips: The motherboard must support PCI-E3.0 to reach 900-1060M/s, PCI-E2.0 below 700-800M/s. The specific speed with the motherboard, hard disk enclosure controller and SSD related to different devices speed is not the same.
Color : MCA1213
DsaResponsiblePartyAddress : info@sino-sear.com
ExternallyAssignedProductIdentifier : 7688270813044
ExternallyAssignedProductIdentifier1 : 7689230300703
ExternallyAssignedProductIdentifier2 : 7688270812962
ItemName : JMT PCI-E X4 to 2-Port USB-C+A Expansion Card USB3.2 Dual Channel 10Gbps for 4U 2U Chassis (MCA1213)
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemTypeKeyword : computer-usb-port-cards
Manufacturer : JMT
NumberOfItems : 1
PartNumber : F53857
ProductDescription : JMT PCI-E X4 to 2-port USB-C+A Expansion Card USB3.2 Dual Channel 10Gbps for 4U 2U Chassis


Description
The Card is a dual-port SuperSpeed USB 3.1 PCI-E add-in card that compliant with PCI-Express Generation 2 for host systems (dual-channel x2) specification. When connected to a USB 3.1 compliant peripheral, it can transfer data at speeds up to 10Gbps while maintaining compatibility with existing USB peripherals.

USB 3.1 performance is up to 2x faster than USB 3.0 connections and up to 20x faster than USB 2.0 connections. 
It eliminates the need for an additional power adapter connection to deliver efficient power to USB devices.



Performance Characteristics

- PCI Express Base Specification Revision 2.0 Dual Channel (x2)
- Universal Serial Bus 3.1 specification Gen2 compliant.
- Compliant with x HCI 
(Extensible Host Controller Interface) Specification Revision 1.1.
- Dual external USB3.1 Super-Speed+ Type-A ports on the expansion system.
- Built-in overcurrent protection on each USB port.
- Supports Remote Wake on Device functionality via USB keyboard or mouse.
- Hot-swap feature allows connecting/disconnecting devices without powering down the system.
1 x 15-pin SATA connector

Transfer Rates: 
SuperSpeed+ (10Gpbs), UltraSpeed (5Gpbs), High Speed (480Mbps)
Full Speed (12Mbps), Low Speed (1.5Mbps)
Compatible Devices: Universal Serial Bus USB3.1 / USB3.0 / USB2.0 / USB1.1
IRQ&IO: assigned by system.

 
ProductSiteLaunchDate : 2025-02-24T11:40:01.707Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 43201400
WarrantyDescription : 1