Cart 2 india

Editorial Review
System Requirements: Windows XP/Vista/Win 7 8 or up, Linux 2.6.4 or up, Android 2.1 or up, and Mac OS 10.6 or up Adapter built-in a DC-in jack, it works with 5V USB chargerConnect a compatible device directly to an Ethernet cable can result in speeds two or three times faster than WIFIFeatureDriver Provider: RealTek Chipset: RTL8152cable length: 3.9 inches / 10cm Support all USB standard commands Support TCP/IP, NetBEUI, ipx/spx transfer protocolHalf/Full duplex 10/100Mbps operationSupport Wake-on-Lan (WoL) and RealWoW Switch 10/100Mbps network automatically Support IEEE 802.3/802.3U/802.3x/802.1/802.1Q/802.3az-2010 protocolCompliant to USB1.0/1.1/2.0/3.0 Extremely low power consumptionIndependent MAC network addressTESTED:Works with NetBooks, Notebooks, UltraBooks, MacBook Air Lion and Mountain Lion 10.6 or above.Works with Nexus 7 1st gen, up to Android 4.4.4. and Nexus 7 2nd gen, with Android 5.0.1 or later.Works with Samsung's newer tablets that have an ETHERNET menu in Android Settings such as Tab4 8in and 10.1 in, Tab PRO, Note PRO, Tab-S.All other models of Samsung Tablets without an Ethernet menu DO NOT support this Ethernet adapterWorks with Android "Stick Computers" such as MK802, MK808 and UG802. Some Sticks may need a powered USB hub EXCEPTIONS: This Micro USB Ethernet with 3 Port Hub will not work if tablet manufacturers have not included an Ethernet (wired internet) capability in their version of the Operating System. For this reason, the following ANDROID tablets can not use this adapter: Samsung tablets, ACER, Lenovo, Sony, Coby-Kyros. Toshiba models "Thrive7", AT200" (ExciteLE) will not work with this adapter. This adapter will not Enable a tablet that is not configured to work with Ethernet. Consult your Manufacturer or your applicable web forum if you are uncertain.

Features
1) Hardware Requirements: notebook, Tablets, desktop computer with one available micro-b port, and raspberry pi zero / pi 2
2) Driver-less design for Windows 8.1 / 10 (32/64 bit) or up, Mac OS 10.9 or up, and Android 4.0 or up operation system
3) Add 10/100M speed wired network; Add 3port 2.0 USB; Support OTG On-The-Go, works with mouse and keyboard, support HDD, USB flash disk, SSD, card reader data transfer etc
4) Micro usb to usb hub, powered by DC cable (included), we need to plug cable in when we do hard disk (HDD) large data transfer
5) Limited Android compatibility. Android users, before you buy be sure to look if the device has a (grayed out) "Ethernet" menu in Settings under WIRELESS & NETWORKS. Most probably it will just work then

Specification
Binding : Electronics
Brand : Smays
Color : Micro-USB Ethernet Adapter to OTG USB HUB
EAN : 0522014547314
Label : Smays
Manufacturer : Smays
Model : GAZEWALL19810006-1
OperatingSystem : Linux
PackageDimensions_Weight : 0.02 pounds
PackageDimensions : L:5.80 X W:1.40 X H:0.40
ProductGroup : Personal Computer
ProductTypeName : COMPUTER_COMPONENT
Publisher : Smays
Studio : Smays
Title : Smays Micro USB to RJ45 Ethernet LAN Network Adapter combo OTG Hub, compatible Windows / Android / Raspbian Jessie Tablet, Linxu Raspberry Pi 2 / Pi Zeros