GearMo FTDI USB to UART with +3.3V TTL Adapter (OEM FTDI Cable)

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 4100/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information

Editorial Review
This USB to TTL Serial Adapter is a full featured, bus powered, USB device that allow any embedded controller to send and receive serial data via the USB bus. The USB to TTL Serial Adapter will allow data rates of up to 3M Baud and features a full set of modem handshaking controls, When used with the (royalty-free) Virtual COM Port Drivers, the USB to TTL Serial Adapter can be interfaced to any serial terminal application as if it is a standard serial port. When combined with the (royalty-free) D2XX drivers, the USB to TTL Serial Adapter can become a powerful serial engine that can be used to interface to any custom applications where high speed serial communications to your embedded project is required. The Cable provides a USB to TTL Serial interface with various end connectors. Single board USB to asynchronous serial data transfer interface Entire USB protocol handled by the electronics in the cable USB UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking Data transfer rates from 300 baud to 3 Mbaud at TTL levels. +3.3V output allows external logic to be powered from the USB port Transmit and receive LEDs UHCI / OHCI / EHCI host controller compatible Low USB bandwidth consumption Driver Chips FTDI Compliant USB Ver 2.0 &1.1 Connector Upstream USB Type A Male Connector Device Mini USB 8P Male Power Mode Bus Cable Length 2m Housing Molding (PVC)

Features
1) USB to UART with +3.3V TTL Adapter
2) Fully assisted hardware (RTS#/CTS#) or X-On / X-Off software handshaking
3) UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
4) +3.3V output allows external logic to be powered from the USB port
5) Voltage level Supports +3.3V based UART signals and +3.3V / 50mA power output

Specification
Binding : Electronics
Brand : Gearmo
EAN : 0729440625962
Label : GearMo
Manufacturer : GearMo
ProductGroup : PC Accessory
ProductTypeName : NETWORKING_DEVICE
Publisher : GearMo
Studio : GearMo
Title : GearMo FTDI USB to UART with +3.3V TTL Adapter (OEM FTDI Cable)

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.