Cart 2 india

Specification
AgeRangeDescription : 36 months to 1188 months
Amperage : 1.3 amps
BatteriesIncluded : 1
BatteriesRequired : 1
Brand : Pyhodi
BulletPoint1 : 【PREMIUM MATERIAL】This UPS power board is made of premium Printed Circuit Board, the UPS power board is not easy to damage, and very for long term use. Power Measurement Accuracy: Error ±2%Battery Specification: 1 x 3.7V 1000mAh Lithium Battery(built in battery).
BulletPoint2 : 【SERIAL PORT FUNCTION】UPS Lite V1.2 removes the rarely used serial port function, optimizes the battery power supply circuit, and pi zero battery uses ultra low on resistance MOS tube for power supply control, which improves the battery life. Function: UPS power supply specially designed for Raspberry Pi Zero.
BulletPoint3 : 【SIMPLE INSTALLATION】Theconvenient installation will save both your tiem and effoprt, and the standby time in actual test is up to 6 hours. Supports external power plug detection, also standby power is zero supports charging and discharging, has dual color charging status indicator.
BulletPoint4 : 【How to Use】Align the four fixing holes of the for Raspberry Pi with the four screws of the UPS, and then lock the matching nuts. Note that the for Raspberry Pi needs to be soldered to use the UPS Lite. Because the connection between the Raspberry Pi and the UPS Lite is achieved by contact with the pin header.
BulletPoint5 : 【SPECIALLY DESIGNED】A UPS power supply specially designed for Raspberry Pi zero, which integrates a fuel gauge chip (MAX17040G) and a 1000mAh lithium battery. Ultra low power consumption, basically power is only required for refreshing. Charging Current: 400mAOutput Voltage: 5.1V ±0.1.
Color : Black
CpsiaCautionaryStatement1 : choking_hazard_small_parts
CpsiaCautionaryStatement2 : no_warning_applicable
CustomerPackageType : Standard Packaging
EducationalObjective : Math
ExternallyAssignedProductIdentifier1 : 018343002445
ExternallyAssignedProductIdentifier10 : 0045555688921
ExternallyAssignedProductIdentifier11 : 0642125212885
ExternallyAssignedProductIdentifier12 : 0373321209538
ExternallyAssignedProductIdentifier13 : 0191120052168
ExternallyAssignedProductIdentifier14 : 0803982799111
ExternallyAssignedProductIdentifier15 : 0037332120953
ExternallyAssignedProductIdentifier16 : 0151903071069
ExternallyAssignedProductIdentifier17 : 00037332120953
ExternallyAssignedProductIdentifier18 : 10037332120950
ExternallyAssignedProductIdentifier19 : 00373321209538
ExternallyAssignedProductIdentifier2 : 0018343002445
ExternallyAssignedProductIdentifier3 : 00018343002445
ExternallyAssignedProductIdentifier4 : 037332120953
ExternallyAssignedProductIdentifier5 : 642125212885
ExternallyAssignedProductIdentifier6 : 012304457220
ExternallyAssignedProductIdentifier7 : 151903071069
ExternallyAssignedProductIdentifier8 : 045555688921
ExternallyAssignedProductIdentifier9 : 0012304457220
FormFactor : Compact
FrequencyRange : 50/60 Hz (± 3 Hz)
Hazmat1 : LITHIUM ION BATTERIES
Hazmat10 : DE_SmallLithiumIonBatteryStandalone
Hazmat11 : EG_SmallLithiumIonBatteryStandalone
Hazmat12 : ES_SmallLithiumIonBatteryStandalone
Hazmat13 : FR_SmallLithiumIonBatteryStandalone
Hazmat14 : GB_SmallLithiumIonBatteryStandalone
Hazmat15 : IN_SmallLithiumIonBatteryStandalone
Hazmat16 : IT_SmallLithiumIonBatteryStandalone
Hazmat17 : JP_SmallLithiumIonBatteryStandalone
Hazmat18 : MX_SmallLithiumIonBatteryStandalone
Hazmat19 : NL_SmallLithiumIonBatteryStandalone
Hazmat2 : UN3480
Hazmat20 : PL_SmallLithiumIonBatteryStandalone
Hazmat21 : SA_SmallLithiumIonBatteryStandalone
Hazmat22 : SE_SmallLithiumIonBatteryStandalone
Hazmat23 : SG_SmallLithiumIonBatteryStandalone
Hazmat24 : TR_SmallLithiumIonBatteryStandalone
Hazmat25 : US_SmallLithiumIonBatteryStandalone
Hazmat26 : ZA_SmallLithiumIonBatteryStandalone
Hazmat27 : 9
Hazmat3 : II
Hazmat4 : AE_SmallLithiumIonBatteryStandalone
Hazmat5 : AU_SmallLithiumIonBatteryStandalone
Hazmat6 : BE_SmallLithiumIonBatteryStandalone
Hazmat7 : BR_SmallLithiumIonBatteryStandalone
Hazmat8 : CA_SmallLithiumIonBatteryStandalone
Hazmat9 : CN_SmallLithiumIonBatteryStandalone
IncludedComponents : 1 CD
IndoorOutdoorUsage : indoor
ItemName : Battery Pack, Easy Installation UPS Power Board for Raspberry Pi Zero, Uninterruptiblepowersupply Lite Supply Battery Pack Charger Accessory for Raspberry Pi Zero
ItemPackageDimensions_Height : 9.7 centimeters
ItemPackageDimensions_Length : 1.7 centimeters
ItemPackageDimensions_Width : 7.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : uninterrupted-power-supplies
Manufacturer : Pyhodi
ManufacturerMaximumAge : 1188
ManufacturerMinimumAge : 36
Material : Learning Wrap-Up
MaximumPower : 6.63 watts
ModelName : Division
ModelNumber : Pyhodinrp94f1u7h
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : Manual
OutputCurrent : 1.3 amps
OutputVoltage : 5.1 volts
OutputWattage : 6.63 watts
PackageLevel : unit
PartNumber : Pyhodinrp94f1u7h
Pattern : UPS System
PowerPlugType : no_plug
PowerSourceType : Manual
ProductDescription : 1. UPS Lite removes the rarely used serial port function, optimizes the battery power supply circuit, and uses ultra low on resistance MOS tube for power supply control, which improves the battery life.
2. A UPS power supply specially designed for Raspberry Pi zero, which integrates a fuel gauge chip (MAX17040G) and a 1000mAh lithium battery.
3. Theconvenient installation will save both your tiem and effoprt, and the standby time in actual test is up to 6 hours.
4. Supports external power plug detection, also supports charging and discharging, has dual color charging status indicator.
5. Made of premium Printed Circuit Board, the UPS power board is not easy to damage, and very for long term use.

Specification:
Item Type: UPS Power Board
Material: Printed Circuit Board
Function: UPS power supply specially designed for Raspberry Pi Zero.
Charging Current: 400mA
Output Voltage: 5.1V ±0.1V
Output Current: 1.3A at 5V (no external adapter is plugged in, only battery power is used), 2A at 5V (when the external adapter is inserted).
Power Measurement Accuracy: Error ±2%
Battery Specification: 1 x 3.7V 1000mAh Lithium Battery(built in battery)

How to Use:
Align the four fixing holes of the for Raspberry Pi with the four screws of the UPS, and then lock the matching nuts. Note that the for Raspberry Pi needs to be soldered to use the UPS Lite. Because the connection between the Raspberry Pi and the UPS Lite is achieved by contact with the pin header.

Package List:
1 x UPS Power Board
4 x Nut

Note:
It is recommended to use a power adapter with a power of 5V2A and to the UPS Lite. Because when the lithium battery is low, the external power adapter not only needs to supply power to for Raspberry Pi, but also needs to provide part of the current to the lithium battery.

ProductSiteLaunchDate : 2023-03-20T04:21:07.080Z
Runtime : 6 hours
Size : 800 VA
StreetDate : 2019-01-01T00:00:01Z
Style : Division
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
TargetAudienceKeyword : unisex-children
TargetGender : unisex
Theme : Music
TotalPowerOutlets : 8
UnspscCode : 26111700
Voltage : 12 volts
Voltage1 : 5 volts
Voltage2 : 3.7 volts
WarrantyDescription : 3 years warranty
Wattage : 6.63 watts