Cart 2 india
In2Cart
Rs. 0
0
Product Information
Editorial Review
The miter box created from this kit allows you to cut perfect scarf joints with just a flush-cut hand saw (not included). Only a screwdriver is needed for assembly (no glue required), and only takes about 15 minutes. This miter box jig was designed by Ben Gitty Baker specifically for the standard 1.5-inch-wide 1x2 cigar box guitar neck. Narrower stock can be cut (shimming recommended), but wider necks will not fit. This miter box is cut from premium 6mm Baltic birch plywood and assembled using 34 screws in pre-drilled, pre-countersunk holes. The scarf joint cut angle is the same as what we cut for the necks we produce in the C. B. Gitty shop. This kit comes UNASSEMBLED and requires a compatible flush-cut style saw to use. These kits are cut and packaged here in the C. B. Gitty workshop in Rochester, New Hampshire. As with all laser-cut items, one side of each piece may have some staining left over from the laser-cutting process. This does not affect functionality of the tool, but can be sanded off if desired. Because this is a wooden miter box, over time the saw guide slot may widen, causing the tool to become less accurate. Steady, careful sawing can help prevent this. Replacement panels may be made available if demand arises.
Features
1) Easy-to-assemble with just a screwdriver - No glue required!
2) Designed for standard 1x2 neck blanks for Cigar Box Guitars
3) Perfect angle scarf joint without power tools
4) For use with a flush-cut pull saw (not included)
5) Laser-cut in the USA
Specification
Binding : Misc.
Brand : C. B. Gitty
EAN : 0602589224251
Label : C. B. Gitty Crafter Supply
Manufacturer : C. B. Gitty Crafter Supply
ProductGroup : Home Improvement
ProductTypeName : TOOLS
Publisher : C. B. Gitty Crafter Supply
Studio : C. B. Gitty Crafter Supply
Title : Scarf Joint Miter Box Kit for Cigar Box Guitars - Cut Perfect Scarf Joints by Hand!
The miter box created from this kit allows you to cut perfect scarf joints with just a flush-cut hand saw (not included). Only a screwdriver is needed for assembly (no glue required), and only takes about 15 minutes. This miter box jig was designed by Ben Gitty Baker specifically for the standard 1.5-inch-wide 1x2 cigar box guitar neck. Narrower stock can be cut (shimming recommended), but wider necks will not fit. This miter box is cut from premium 6mm Baltic birch plywood and assembled using 34 screws in pre-drilled, pre-countersunk holes. The scarf joint cut angle is the same as what we cut for the necks we produce in the C. B. Gitty shop. This kit comes UNASSEMBLED and requires a compatible flush-cut style saw to use. These kits are cut and packaged here in the C. B. Gitty workshop in Rochester, New Hampshire. As with all laser-cut items, one side of each piece may have some staining left over from the laser-cutting process. This does not affect functionality of the tool, but can be sanded off if desired. Because this is a wooden miter box, over time the saw guide slot may widen, causing the tool to become less accurate. Steady, careful sawing can help prevent this. Replacement panels may be made available if demand arises.
Features
1) Easy-to-assemble with just a screwdriver - No glue required!
2) Designed for standard 1x2 neck blanks for Cigar Box Guitars
3) Perfect angle scarf joint without power tools
4) For use with a flush-cut pull saw (not included)
5) Laser-cut in the USA
Specification
Binding : Misc.
Brand : C. B. Gitty
EAN : 0602589224251
Label : C. B. Gitty Crafter Supply
Manufacturer : C. B. Gitty Crafter Supply
ProductGroup : Home Improvement
ProductTypeName : TOOLS
Publisher : C. B. Gitty Crafter Supply
Studio : C. B. Gitty Crafter Supply
Title : Scarf Joint Miter Box Kit for Cigar Box Guitars - Cut Perfect Scarf Joints by Hand!
