Cart 2 india

Specification
Brand : WECO FILTERS CHANGING THE COURSE OF WATER PURIFICATION
BulletPoint1 : Simple installation between the water supply and RO system. Quick connect/disconnect ⅜" fittings.
BulletPoint2 : Correct low pressure problems or increase production of your existing reverse osmosis (RO) drinking water filter system and maintain proper water pressure for maximum pure water output.
BulletPoint3 : Works for up to 100 gallons per day (GPD) RO systems.
BulletPoint4 : Achieve higher TDS rejection (maximum contaminant reduction).
BulletPoint5 : Pressure gauge for real time boosted pressure readings. Pump, transformer, RO storage tank pressure sensor, complete wire harness, strainer and pressure stabilizer / particle filter with clear sump included.
Capacity : 50 gallons_per_day
Color : mixed
ExternallyAssignedProductIdentifier1 : 0745051165666
ExternallyAssignedProductIdentifier2 : 745051165666
ExternalTestingCertification : NSF
FilterLifeCycle : 6 months
IncludedComponents : Sediment Filter, Iron Manganese Filter, CTO Filter
InstallationType : Under Sink
ItemDisplayWeight : 30 pounds
ItemName : WECO Reverse Osmosis (RO) Pressure Booster Pump Kit
ItemTypeKeyword : undersink-water-filtration-systems
Manufacturer : Water Engineering Corporation
Material : polypropylene
ModelName : WH3S2
ModelNumber : GYC-3800
NumberOfItems : 1
OperatingPressureRange : 45 - 75 pounds_per_square_inch
PartNumber : GYC-3800
PowerSourceType : Corded Electric
ProductBenefit : Removes sediment and sand for cleaner water, with easy maintenance and high flow rate.
ProductDescription : Well water supplies often suffer from low or inconsistent water pressure. Well pumps may not be able to maintain the proper water pressure (60 PSI) required for an RO filtration system. Even some municipal water systems have unsuitable water pressure. If you live in an apartment or high-rise building your water pressure can fluctuate as water use increases throughout the facility. This may cause your reverse osmosis filter system to stop working or work very poorly. If the water pressure is below 30 PSI, the RO system will divert more water to drain than is necessary. The water purity of the filtered water can also decline because the reverse osmosis membrane cannot function properly. The WECO GYC Booster Pump Kit can be used to correct a low-pressure condition or replace a broken booster pump. The WECO Booster Pump Kit uses a safe low-voltage transformer to provide electric power to the pump. The booster pump increases the incoming water pressure to the ideal 60 PSI or higher (40 PSI at the tank). This water pressure level maximizes the number of gallons produced per day while minimizing the amount of wastewater sent to the drain. The GYC Booster Pump kit is designed in the United States and manufactured with high-quality components that will provide years of trouble-free service.
ProductShelfLife : 6 months
ProductSiteLaunchDate : 2020-08-21T13:01:11.921Z
PurificationMethod : Sedimentation
PurificationMethod1 : Ultraviolet
PurificationMethod2 : Reverse Osmosis
Size : GYC-3800
Style : Submersible
SupportedWaterTdsLevelMaximumPpm : 1000
UnitCount : 1
UnspscCode : 40151500
UpperTemperatureRating : 100 degrees_fahrenheit
Voltage : 12 volts_of_direct_current