SpecificationAccessLocation : Bottom
Brand : Gavigain
BulletPoint : ABICOR BINZEL ROBO Water Cooled 960W-65FD-FG
BulletPoint1 : Build to Last: The high-quality PP and the electrostatic spraying treatment prevent our water dispenser from being rusted, deformed, and corroded, making it beautiful and practical for a long time.
BulletPoint2 : Meet Your Needs: The drink dispenser comes with heating and cooling functions, and the three water outlets can produce hot water, cold water, and room temperature water at the same time to meet your different drinking water needs throughout the year.
BulletPoint3 : Efficient Working: The water cooler dispenser comes with 500W heating power and 90W cooling power, making the cooling capacity up to 0.53Gal/H, and the heating capacity up to 1.32Gal/H, allowing you to enjoy hot or cold water quickly.
BulletPoint4 : User-friendly Design: Compared to normal water dispensers, the lower bottom-loading design of this dispenser makes it easier to change bottles, so that people with less strength, such as the elderly and women, can easily change bottles on their own.
BulletPoint5 : Safe to Use: When the water temperature is too high or too low, the thermostat will automatically disconnect, and the product is also equipped with over-temperature protection, overload protection, and anti-dry burn protection to ensure your safety in daily use.
Capacity : 3.2 gallons
Capacity1 : 2 liters
Capacity2 : 5 liters
Color : White
CoolingMethod : Water
IncludedComponents : ALL ITEMS PICTURED
InstallationType : Freestanding
ItemName : Wasser, Water Filtration System Expansion Tank, Pressurized Water Storage Tank with Ball Valve, Pressurized Ro Water Storage Tank, 3.2 Gallon Residential Pre-Pressurized Reverse Osmosis Water Storage
ItemPackageDimensions_Height : 25 centimeters
ItemPackageDimensions_Length : 35 centimeters
ItemPackageDimensions_Width : 25 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : undersink-water-filtration-systems
Manufacturer : Gavigain
Material : Polypropylene (PP)
ModelName : Water Dispenser
ModelNumber : 2d759f67-113c-406e-bb0e-713e9bbf7451
NumberOfItems : 1
NumberOfSettings : 3
PartNumber : Gavigainve7twhomb9
PowerSourceType : Powersource
ProductDescription :
Specification:
Material: Food-grade ABS
Size: approx.240*240*350mm / 9.45*9.45*13.78in
Package weight: 2.26kg
Capacity: 3.2 gallon(12L)
Working pressure: 50Mpsi
Interface size: 2 points valve
Gas storage pressure: 7psi
Usage:
1. Remove the water inlet cap, slowly screw the pressure tank ball valve into the upper water inlet, hand tighten, insert 1/4" PE pipe and insert it into the end.
2. Check if there is any leakage after turning on. If it is found, adjust the pressure barrel ball valve in time, if necessary, wrap the PTFE TAPE at the water inlet.
3. In order to clean the pressure tank liner and the RO machine, after the first barrel of water is filled, please open the pure water in the barrel and drain the second barrel for drinking.
4. During normal use, the water should be drained once a month, and once every time the filter element is replaced,
it should be drained once to achieve the purpose of cleaning the liner, filter element and pipeline.
Package List:
1* Pressurized Water Storage Tank
1* Valve
Note:
1. This product uses plastic thread. Please install the ball valve correctly to avoid twisting and screwing. Do not tighten too hard.
2. If the user leaves home for a long time, please close the inlet valve and cut off the power supply.
3. When installing, connect the pipeline correctly and confirm whether the high pressure switch can achieve full water shutdown.
4. Pressure tank working temperature 1-45℃
5. Avoid sun exposure to pressure bucket.
6. Please allow slight error due to manual measurement and make sure you do not mind before ordering.
ProductSiteLaunchDate : 2023-10-30T11:17:43.241Z
PurificationMethod : Reverse Osmosis
SkipOffer : 1
Style : White
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 48101700
Wattage : 500 watts