Cart 2 india

Specification
Brand : BLUONICS
BulletPoint1 : SAFE & RELIABLE: Bluonics whole house filter reduces many impurities from your water by 99% and protects your family and appliance from Sediment, Sand, Dirt, and more. Bluonics Sediment filters are environmentally friendly, chemical Free, no chlorine, no change of taste, color, and odor. Do not change acidic or alkaline water levels and has no impact on pH.
BulletPoint2 : QUALITY: Fits most standard size 4.5 x 10” Filter housings. Is highly effective for both residential and commercial water purification, and can be used for the city/municipal or well water.
BulletPoint3 : EFFECTIVE: Removes sediment particles such as silt, sand, rust, dirt, and other undissolved particles up to microns.
BulletPoint4 : Please note this filter is not a Reverse Osmosis and will NOT reduce (TDS) Total Dissolved Solids from your water. Looking for a system to remove TDS, you can check Bluonics RO systems. The cartridges are individually wrapped for freshness. Please unwrap the cartridges before using them.
BulletPoint5 : About bluonics: At Bluonics, our mission is to empower individuals and families with access to clean water and fresh air, fostering a healthier and happier way of life. We are dedicated to developing innovative air and water filtration solutions that improve well-being and contribute to a cleaner, more sustainable world
Color : White
ExternallyAssignedProductIdentifier1 : 099461798410
ExternallyAssignedProductIdentifier2 : 0099461798410
ItemName : BLUONICS Sediment Water Filters 20-pack (5 Micron) 4.5" x 10" Whole House Cartridges
ItemPackageDimensions_Height : 10 inches
ItemPackageDimensions_Length : 23 inches
ItemPackageDimensions_Width : 21 inches
ItemPackageQuantity : 20
ItemTypeKeyword : undersink-water-filtration-systems
Manufacturer : Wholesale Market LLC
Material : Polypropylene and Cotton
ModelNumber : PP-10B20
NumberOfItems : 20
PartNumber : PP-10B20
ProductBenefit : Filtration water
ProductDescription : 20 pack Standard Size 4.5”x 10” ( 5 Micron) Sediment Filter. Filters sediment particles such as silt, sand, rust, dirt, and other undissolved particles. Melt-blown Polypropylene Sediment Filters. The main function of a sediment filter is to remove large and fine particles from our drinking water, such as sand, dirt, silt, and rust particles. Our Sediment filters are made of fine melted polypropylene, which is then blown and spun in a cylinder-like form. These filters have a lower density at the surface of the filter with progressively higher density toward the center which enables to capture of particles throughout the entire filter depth. This translates to a longer life and allows better performance of all the following filters, such as Carbon Block or GAC filters. Flow rate: 5-15 GPM (Depend on Feed Water Pressure). Maximum Pressure: 80 psi, SUGGESTED WORK PRESSURE: UNDER 50 PSI, Temperature:40-110°F/5-45°C. Save money and time.
ProductSiteLaunchDate : 2017-01-18T08:00:00.000Z
UnitCount : 2
UnspscCode : 47101500