Cart 2 india

Specification
Brand : Fdit
BulletPoint : PFAS Removal
BulletPoint1 : Enjoying wonderful performance in explosion proofing and compression
BulletPoint2 : Featuring 3.2 gallon metal pressurized .
BulletPoint3 : Made from premium food-grade material, anti-aging, and available for long service life.
BulletPoint4 : Comes with high quality imported air valve core which reduces the risk of air leakage.
BulletPoint5 : Suitable for reverse osmosis water purification system.
BulletPoint6 : Lining Fabric: Constructed with a 420D oxford cloth liner, prevent static electricity and protect the countertop water filter from finer dust, hard sand, etc, from entering, and reduce damage to the water filter from hard granular foreign matter, thereby extending the life of your machine.
Capacity : 3.2 gallons
Color : Defult
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0699838507715
ExternallyAssignedProductIdentifier2 : 699838507715
FilterLifeCycle : 6 months
GpsrSafetyAttestation : 1
IncludedComponents : Storage Tank
InstallationType : Under Sink
ItemDisplayDimensions_Height : 16.25 inches
ItemDisplayDimensions_Length : 14.5 inches
ItemName : 3.2 Gallon Pressurized Water Storage with Ball Valve for Reverse Osmosis RO Systems Water Filter System
ItemPackageDimensions_Height : 36.4 centimeters
ItemPackageDimensions_Length : 24.4 centimeters
ItemPackageDimensions_Width : 24.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : undersink-water-filtration-systems
LowerTemperatureRating : 1 degrees_celsius
Manufacturer : Fdit
ManufactureYear : 2024
Material : Acrylonitrile Butadiene Styrene
MaximumFlowRate : 1.67 gallons_per_minute
ModelName : Steel Stand for 1.5 Gallon Filter System
ModelNumber : 338fd7c5-c5ca-4bb6-9471-0d14f67478f9
NumberOfItems : 1
OperatingPressureRange : 10-125 pounds_per_square_inch
PartNumber : Fditsv9rutxpgk
PowerSourceType : Manual
ProductBenefit : Removes impurities and chemicals for cleaner water throughout the house
ProductDescription : Specification:
Condition: Brand new
Material: Food-grade ABS
Size: approx.240*240*350mm / 9.45*9.45*13.78in
Package weight: 2.26kg
Capacity: 3.2 gallon(12L)
Working pressure: 100Mpsi
Interface size: 2 points valve
Gas storage pressure: 7psi

Usage:
1. Remove the water inlet , slowly screw the pressure ball valve into the upper water inlet, hand tighten, insert 1/4" PE pipe and insert it into the end.
2. Check if there is any leakage after turning on. If it is found, adjust the pressure ball valve in time, if necessary, wrap the PTFE TAPE at the water inlet.
3. In order to the pressure liner and the RO machine, after the first of water is filled, please open the pure water in the and drain the second for drinking.
4. During normal use, the water should be drained once a month, and once every time the filter is replaced, it should be drained once to achieve the purpose of the liner, filter and pipeline.

Package List:
1* Pressurized Water Storage
1* Valve

Note:
1. This product uses plastic thread. Please install the ball valve correctly to avoid twisting and screwing. Do not tighten too hard.
2. If the user leaves home for a long time, please close the inlet valve and cut off the power supply.
3. When installing, connect the pipeline correctly and confirm whether the high pressure switch can achieve full water shutdown.
4. Pressure working temperature 1-45
5. Avoid sun exposure to pressure bucket.
6. Please allow slight error due to manual measurement and make sure you do not mind before ordering.

ProductSiteLaunchDate : 2019-08-21T07:00:00.000Z
PurificationMethod : Reverse Osmosis
PurificationMethod1 : Reverse Osmosis
PurificationMethod2 : Alkaline
Size : 10x54
StrapType : Convenient Handle
Style : OnliPure for Zero TDS
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40141600
UpperTemperatureRating : 100 degrees_fahrenheit
WaterResistanceLevel : waterproof