Cart 2 india

Specification
Brand : PATIKIL
BulletPoint1 : Specification: Size: 70x100x1.2mm/2.8x4x0.048 inch; Color: Copper; Material: FR4, Copper; Packing List: 12 Pcs Single Sided Copper Clad Laminate PCB
BulletPoint2 : Advantage: Copper Clad Laminate PCB is made of FR4, which has high mechanical and dielectric properties, good heat and moisture resistance, and good machinability.
BulletPoint3 : Instruction: The mechanical properties, dimensional stability, impact resistance and moisture resistance of FR4 PCB substrate are higher than those of paper substrate. In terms of processing technology, it has great advantages over other resin glass fiber cloth substrates.
BulletPoint4 : Application: Copper Clad Laminate PCB is used as insulating structural parts in motors and electrical equipment, including various types of switch FPC reinforcement, electrical insulation carbon film printed circuit boards, computer drilling pads, jigs, etc. (PCB test racks), and can be used in humid environments and transformer oil.
BulletPoint5 : Note: The boards may come with superficial scratches and surface marks but don't affect performance
BulletPoint6 : 【Buy with Confidence】: We’d love hear from you about our product, Regardless of positive side or negative side, we are working on doing it better! If you are not fully satisfied. Please don’t hesitate to contact us if you need help.[Small Tip: ①Each spray mop has be spray function tested before sent,a small amount of water may remain in bottle is normal phenomenon.②Please clean the water tank and spray nozzle of the floor mop after use to keep it clean and protected.
BulletPoint7 : 【MEXERRIS Tips】:③Please don't fill boiling or impurity water, strong acid,alkali detergent into the bottle of the wet mop.④Please fully dilute solutions with plain water,because concentrated solutions may corrode mop internal parts or some floor types. ⑤ There are two small silicone plugs on the bottle cap of our spray mop. Please be careful not to lose them when cleaning the bottle to prevent the bottle from leaking.
Color : Purple
ItemName : PATIKIL 2.8x4 inch Double Sided Copper Clad Laminate PCB, 12 Pcs 1.2mm Thickness FR4 Copper Plated Universal Circuit Prototype Board for Etching DIY PCB Kit
ItemPackageDimensions_Height : 0.67 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 12
ItemTypeKeyword : uncoated-prototyping-boards
Manufacturer : PATIKIL
Material : FR4,Copper
ModelName : spray mops for floor cleaning
ModelNumber : wet mop for floor cleaning
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : ptf240626tt000107
ProductDescription : Copper Clad Laminate PCB is used as insulating structural parts in motors and electrical equipment, including various types of switch FPC reinforcement, electrical insulation carbon film printed circuit boards, computer drilling pads, jigs, etc. (PCB test racks), and can be used in humid environments and transformer oil.

Specification
Size: 70x100x1.2mm/2.8x4x0.048 inch;
Color: Copper;
Material:FR4, Copper;
Packing List: 12 Pcs Single Sided Copper Clad Laminate PCB

Advantage
Copper Clad Laminate PCB is made of FR4, which has high mechanical and dielectric properties, good heat and moisture resistance, and good machinability.

Instruction
The mechanical properties, dimensional stability, impact resistance and moisture resistance of FR4 PCB substrate are higher than those of paper substrate. In terms of processing technology, it has great advantages over other resin glass fiber cloth substrates.

Note
The boards may come with superficial scratches and surface marks but don't affect performance
ProductSiteLaunchDate : 2024-08-20T05:32:43.906Z
Size : 100x70x1.2mm
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Floor, Wood, Hardwood, Marble, Tile, Laminate, Ceramic, Wall, Ceiling
UnspscCode : 41000000