Cart 2 india

Specification
Brand : Wisoqu
BulletPoint1 : Small size, convenient to use, it can accurately measure distance
BulletPoint2 : Low voltage, low power consumption,
BulletPoint3 : High measuring , strong anti-interference ability
BulletPoint4 : Integrated with wire enclosed water-resistant sensor, suitable for wet, harsh measurement
BulletPoint5 : Widely used for horizontal distance measuring, obstacle avoidance, automatic control,security, industrial control, etc
Department1 : unisex-adult
Department2 : unisex-adult
ItemName : Distance Sensor,5V Ultrasonic Distance Detector,High Measuring, Strong AntiInterference for Wet, Harsh Measurement
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 21 centimeters
ItemPackageDimensions_Width : 14 centimeters
ItemTypeKeyword : ultrasonic-proximity-sensors
Manufacturer : Wisoqu
Material : Plastic+sponge+wood
ModelName : Wisoquhqicgw53fs
ModelNumber : Wisoquhqicgw53fs
PartNumber : Wisoquhqicgw53fs
ProductDescription : Specifications:

Working Voltage
DC5V
Quiescent Working Current
5mA
Total Working Current
30mA
Transmit Frequency
40kHz

. Measuring Distance
5m
Blind Zone
25cm
Size
28.5*41mm
Resolution
Approx 0.5cm
Angle
<50 degree
Working Temperature
-10℃~70℃
Storage Temperature
-20℃~80℃

Wiring:

+5V (power supply positive)

Trig (control) RX

Echo (receive) TX

GND (power supply negative)

Basic Working Principle:

(1) Using IO port TRIG measuring distance, high level for at least 10uS.

(2) Module automatically sends eight 40kHz , automatically detects whether there is return .

(3) When there is return , through IO port output a high level, the duration of the high level is the time of ultrasonic from sending to returning.Test distance = (high level time * sound velocity (340m/S))/2;

This module is simple to use, a port sends a high level of more than 10uS, then wait for high level output at receive port. Timer was enabled once there is output, and read time when this port becomes low level, which is the time of this measurement. Use the time to calculate distance. Constantly cycle measurement can your mobile measuring values.

Formula:

uS/58= cm or uS/148= inches;

Or:

Distance = high level time * sound velocity(340m/S)/2;

Suggested
ProductSiteLaunchDate : 2024-06-20T19:27:29.184Z
UnspscCode : 46171600