Cart 2 india

Specification
Brand : equlup
BulletPoint : aluminum can IP67 rated combination unit: receiver & transmitter high frequency
BulletPoint1 : EASY TO USE: The port sends a high level over 10uS and then waits for a high level output at the receiving port. Once there is an output, the timer is enabled and reads the time this port goes low, the time of this measurement. Use the time to calculate the distance. Continuously cycling through the measurements will give you a moving measurement
BulletPoint2 : MULTI-SCENARIO APPLICATION: Integrated wired enclosed water-proof sensor for wet and harsh measurement situations. Widely used in horizontal distance measurement, obstacle avoidance, automatic control, security, industrial control and other fields
BulletPoint3 : WIRING STABILITY: +5V (power positive), Trig (control) RX, Echoreceive TX, GND (power negative) of the device, it is recommended that the test cycle is greater than 60ms to prevent the impact of the transmit signal on the return signal
BulletPoint4 : APPLICABILITY: The horizontal distance measurement, obstacle avoidance, automatic control, traffic control, security, industrial control. The maximum measurement distance is 5m, and the maximum measurement distance is 5m
BulletPoint5 : STABLE TRANSMISSION: The measuring instrument has high measurement accuracy and strong anti-interference ability. Small size, low voltage, low power consumption, easy to use, can accurately measure the distance, suitable for a variety of scenarios, working temperature -10 ℃ ~ 70 ℃, storage temperature -20 ℃ ~ 80 ℃
ImportDesignation : Imported
IncludedComponents : No
ItemName : Distance Measuring Module and Sensor, 5V Ultrasonic Distance Measuring Board Ranging Module Water Proof Integrated Sensor for Traffic Control, Security
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 21 centimeters
ItemPackageDimensions_Width : 14 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : ultrasonic-proximity-sensors
Manufacturer : equlup
Material : Plastic+sponge+wood
ModelName : equlup6rvghik4yz
ModelNumber : equlup6rvghik4yz
NumberOfItems : 1
PartNumber : equlup6rvghik4yz
ProductDescription : Specifications:
Working Voltage DC5V
Quiescent Working Current 5mA
Total Working Current 30mA
Transmit Frequency 40kHz
Max. Measuring Distance 5m
Blind Zone 25cm
Size 28.5*41mm
Resolution Approx 0.5cm
Angle
Working Temperature -10℃~70℃
Storage Temperature -20℃~80℃
Wiring:
+5V (power supply positive)
Trig (control) RX
(receive) TX
GND (power supply negative)
Basic Working Principle:
(1) Using IO port TRIG trigger measuring distance, high level signal for at least 10uS.
(2) Module automatically sends eight 40kHz square , automatically detects whether there is return signal.
(3) When there is return signal, through IO port output a high level, the duration of the high level is the time of ultrasonic from sending to returning.Test distance = (high level time * sound velocity (340m/S))/2;
This module is simple to use, a port sends a high level of more than 10uS, then wait for high level output at receive port. Timer was enabled once there is output, and read time when this port becomes low level, which is the time of this measurement. Use the time to calculate distance. Constantly cycle measurement can reach your mobile measuring values.
Formula:
uS/58= cm or uS/148= inches;
Or:
Distance = high level time * sound velocity(340m/S)/2;
Suggested test cycle is more than 60ms, in order to prevent effect of transmitting signal on signal.

Package Includes:
1 x Distance Measuring Module and Sensor

Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.



ProductSiteLaunchDate : 2025-03-03T03:18:24.657Z
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 46171600
WarrantyDescription : Manufacturer warranty for 90 day