Cart 2 india

Specification
Brand : GBJ
BulletPoint1 : 1）Cermet inserts：Wear-resistant and heat-resistant, not easy to stick to the holders or workpieces.
BulletPoint2 : 2) Sharp cutting edge, cutting edge polished treatment ,smooth chip evacuation.
BulletPoint3 : 3) Strong impact resistance, good versatility.
BulletPoint4 : 4) For processing with high gloss, high precision, high finish and high wear resistance.
BulletPoint5 : 5) Suitable for finishing and semi-finishing of various steel parts, quenched and tempered steel of hardness within HRC55, also apply to cast iron workpieces
ExternallyAssignedProductIdentifier1 : 0737036877862
ExternallyAssignedProductIdentifier2 : 737036877862
ItemName : Cermet Inserts TBGT0601 /TPGH0802 /TPGH0902 / TPGH1103 Ceramic Boring Insert/Ceramic Inserts for Finishing and Semi-Finishing Cermet Inserts for polishing (TPGH110302L-FS)
ItemTypeKeyword : turning-inserts
Manufacturer : GBJ
PartNumber : GBJ
ProductDescription : Products Details:

Cermet inserts：Wear-resistant and heat-resistant, not easy to stick to the holders or workpieces.

When the cutting depth is below 2.6mm, when the feed per revolution is below 0.25mm/R, when the feed per tooth is below 0.2mm/Tooth, it can show stable performance and good finish, and extend the life of the tool. (Not recommended for use in the field of intermittent cutting)


Recommend cutting speed for Ceramic Boring insert :

220(180-250m/min) for Continuous cutting on steel
180（150-210m/min ) for finishing on cast rion）


TPGH110302L-FS
Positive angle: 11°
Cutting edge length: 11mm
Thickness: 2mm
Radius: 0.2
Direction: L / left hand
Applicable material: for steel and cast iron

ProductSiteLaunchDate : 2021-04-01T11:04:37.564Z
Style : TPGH110302L-FS NX2525