Cart 2 india

Specification
Brand : Simple Woodturning Tools
BulletPoint : Threaded Aluminum Reusable Remove from lathe without losing center
BulletPoint1 : Shank: 5/8" x 4-1/2"
BulletPoint2 : Insert Style: DNMG
BulletPoint3 : Insert Size: 331, 332
BulletPoint4 : Negative 3 degree cutting edge angle
BulletPoint5 : Right Hand
CompatibleDevices : Lathe
ExternallyAssignedProductIdentifier : 5213013460197
ExternallyAssignedProductIdentifier1 : 703670141515
ExternallyAssignedProductIdentifier2 : 0703670141515
GpsrSafetyAttestation : 1
HandOrientation : Right Hand
IncludedComponents : Glue Hub
ItemName : Simple Woodturning Tools Glue Hub with Threads to Hold Wood Blanks, optional hardwood waste block, Aluminum, Threaded (1.25" - 8 Threads)
ItemPackageDimensions_Height : 6 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 5 inches
ItemPackageQuantity : 1
ItemShape : 1.25" - 8 Threads
ItemTypeKeyword : turning-holders
LockType : Threaded
Manufacturer : Harrison Specialties
Material : Aluminum
MeasurementSystem : Inch
ModelName : Glue Hub
ModelNumber : Glue Hub
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 404-7861
PowerSourceType : Hand Powered
ProductDescription : Threaded, reusable, aluminum glue hub with machined groove for glue or resin. Use with or without hardwood wasteblock - or create your own wasteblock. On and off the lathe as many times as you want without losing exact center. Prevent wasting materials on your project - avoid losing wood for a tenon. Easily remove from the lathe and leave the project to dry or start a new one. Experience the superior strength of metal combined with the convenience of a glue hub that will last you a lifetime. Moves project away from headstock giving you more room to shape the bottom prior to reversing the project. We suggest that you thread the glue hub and waste block on your lathe and true up the surfaces. Once the waste block becomes less than 1" long, you should add more fine-grained hardwood, such as hard maple, to extend the waste block. This will allow you to separate your project without consuming the waste block. Can be glued directly into wood or resin project by drilling a 50MM diameter by 0.5" deep hole using a forstner bit. We recommend using clear Gorilla Glue and allowing 24 hour cure time prior to beginning to turn. Lightweight compared to 4 jaw chuck. Use in conjunction with vacuum chuck, reversing adapter and live tailstock chuck to reverse and center your project to part off and finish the bottom. Waste Block Surface preparation: Be sure surfaces are clean and free of dirt, wax, oil or other substances and follow instructions on your glue bottle. Do not use newspaper. We always recommend using tailstock support as much as possible when turning. This can be done with a live tailstock chuck and a center point. Glue Hub Details: CNC machined from 6061 aluminum 1.90" outside diameter 3.5" Overall Length Choose from either 1" - 8 TPI threads or 1.25" - 8 TPI Optional Hardwood Waste Block: Arrives pre-glued to hub using clear Gorilla glue. Routered from kiln dried hard maple. 2.5" diameter x 1.5" long Milled pocket is 0.50" deep, so your glue hub sits inside the was
ProductSiteLaunchDate : 2023-11-25T22:30:37.205Z
Size : 1", Right Hand
Style : MTJNR2020K16B
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112800