Cart 2 india

Specification
AudioInput : Auxiliary
BatteriesIncluded : 1
BatteriesRequired : 1
Brand : DmgicPro
BulletPoint1 : Frequency: 3-28 MHz, Rated at 5W continuous, 10W intermittent and supplied with BNC connectors for input/output.
BulletPoint2 : Compatible with a wide range of coaxial fed, long wire and balanced line antennas, such as high impedance, low loss UHF twin-lead or 40m-10m ladder line.
BulletPoint3 : Matching impedance range: 25 to 2500 ohms,Z-match tuner is more efficient (less lossy) than other types of tuners.
BulletPoint4 : Automatic Antenna Tuner machine with Shell, fine workmanship, small and exquisite,tuner can be used without assembly, which is a great help for tough outdoor use.
BulletPoint5 : Note: This tuner is only suitable for ORP. Too much power can burn out components.It is essential to check the standing wave before transmitting,otherwise the ORP transmitter without high standing wave protection may burn out.
Color : Brown
CompatibleDevices : Bluetooth, USB
CompatibleDevices1 : Speaker
CompatibleDevices2 : Smartphone
ConnectivityTechnology : USB
ConnectorType : 3.5 mm Jack
ControllerType : Button Control
ControlMethod : push_button
ExternallyAssignedProductIdentifier1 : 762203836441
ExternallyAssignedProductIdentifier10 : 0123456846159
ExternallyAssignedProductIdentifier11 : 6709309015343
ExternallyAssignedProductIdentifier12 : 0717943342622
ExternallyAssignedProductIdentifier13 : 0783719904370
ExternallyAssignedProductIdentifier14 : 1330010669461
ExternallyAssignedProductIdentifier15 : 0805232068220
ExternallyAssignedProductIdentifier16 : 4959112034747
ExternallyAssignedProductIdentifier17 : 5052441582268
ExternallyAssignedProductIdentifier18 : 8935104703873
ExternallyAssignedProductIdentifier19 : 0066512680093
ExternallyAssignedProductIdentifier2 : 0762203836441
ExternallyAssignedProductIdentifier20 : 0884088441739
ExternallyAssignedProductIdentifier21 : 0606559535705
ExternallyAssignedProductIdentifier22 : 0603384034748
ExternallyAssignedProductIdentifier23 : 0791102688257
ExternallyAssignedProductIdentifier24 : 04959112034747
ExternallyAssignedProductIdentifier3 : 884088441739
ExternallyAssignedProductIdentifier4 : 603384034748
ExternallyAssignedProductIdentifier5 : 783719904370
ExternallyAssignedProductIdentifier6 : 805232068220
ExternallyAssignedProductIdentifier7 : 791102688257
ExternallyAssignedProductIdentifier8 : 606559535705
ExternallyAssignedProductIdentifier9 : 123456846159
FrequencyRange : 30 mhz
HardwareInterface : usb
Hazmat : 9
Impedance : 2500 ohm
IncludedComponents : Owner's Manual, ACPower Cord, FM Wire Antenna
IncludedComponents1 : Stand
IncludedComponents2 : TV
ItemName : QRP Manual Antenna Tuner Z-Match 3-28MHz for Ham Radio CW, 5W Z-Match Tuner with BNC, Adjust Impedance Matching
ItemPackageDimensions_Height : 5.5 centimeters
ItemPackageDimensions_Length : 13 centimeters
ItemPackageDimensions_Width : 9.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : audio-component-tuners
Manufacturer : DmgicPro
MaximumRange : 10 meters
ModelName : ENG36F12KF
ModelNumber : AT-QRP
NumberOfItems : 1
PackageLevel : unit
PartNumber : AT-QRP
PowerSourceType : Battery-Powered
ProductDescription :

Frequency: 3-28 MHz

Power: rated power 5W, intermittent power 10W

Matching impedance range: 25 to 2500 ohms

Connector: BNC

Net weight: 261g

How to use

The front panel switch is used to select the mode. When it is in the TUNE n, the standing wave indicator circuit is accessed. When the transmitter is transmitting, the brighter the LED, the higher the standing wave. Two cpacitor controls are used to adjust the matching. The rear switch sets the antenna impedance.

• Note: Standing wave indicator LED.

• Note: It is essential to check the standing wave before transmitting,otherwise the ORP transmitter without high standing wave protection may burn out.

• Note: If quick tuning is not possible, use a network analyser for debugginAt this stage the mode switch should be set to WORK.

• Note: This tuner is for ORP only. Excessive power can cause components to burn out.

Adjusting for a Match：

With your transmitter and antenna connected to the turner,set the tune/operate to the tune position,set the adjustment knobs to the center position.

• Note: tune mode,maximum power input-5watts

Place the HI/LOW impedance switch in the HI position.the HI impedance setting provides the most efficient coupling and operation.

Briefly key your transmitter and attempt to adjust the knobs tp dimthe LED.Continue adjusting back and forth until the LED is out or is as dimas possible.If the adjustments do not produce adequate dimming of the LED switch tothe Low impedance position and repeat the adjustment process.

Note:Under some conditions of match adjustment the LED vwill not go completely out, Your antenna will be tuned for proper operation even if the LED does not cdim completely out.

Switch the tune/operate switch to the operate position. Work thoseDX stations.

ProductSiteLaunchDate : 2025-03-27T07:35:58.930Z
RadioBandsSupported1 : FM
RadioBandsSupported2 : AM
ScreenSurfaceDescription : Flat
StreetDate : 2008-07-22T00:00:01Z
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupportedInternetServices : Free View
TunerTechnology : Digital
TunerTechnology1 : AM
TunerTechnology2 : DAB
TunerTechnology3 : FM
UnitCount : 1
UnspscCode : 43220000
Voltage : 3 volts_of_direct_current
WarrantyDescription : 1 YEAR
WaterResistanceLevel : not_water_resistant
WirelessCommunicationTechnology : Radio Frequency