Cart 2 india

Specification
Brand : ICS Industries
BulletPoint1 : SEAMLESS COPPER WATER TUBE – TYPE K,ASTM B-88
BulletPoint2 : Copper tube (Alloy 12200) has been evaluated by Underwriters Laboratories, Inc. To ANSI/NSF Standard 61 for use in drinking water supplies of pH 6.5 and above. Drinking water supplies which are less than pH 6.5 may require corrosion control to limit leaching of copper into the drinking water. Copper tube has been NSF classified by Underwriters Laboratories, Inc. only to ensure that specific analyzed samples met regulatory requirements.
BulletPoint3 : CUT HARD STRAIGHT LENGTH +/- 5% CUTTING TOLLERANCE
BulletPoint4 : MADE IN USA
BulletPoint5 : ✔️Coil red copper tubing is soft, can be bent and deformed, and can often be made into elbows and joints. Red Copper pipes can be perfectly capable of bending at any angle. When used as a pipe, there will be no problems such as yellowing of tap water and small water flow that occur with galvanized steel pipes.
Color : Copper
ExternallyAssignedProductIdentifier1 : 0630456596569
ExternallyAssignedProductIdentifier2 : 630456596569
ItemDisplayDimensions_Length : 50 feet
ItemLength : 600 inches
ItemName : ICS Industries - 2-1/2" TYPE K HARD COPPER 5 FT LENGTH (2-5/8" OD) ASTM B88 C12200
ItemPackageDimensions_Height : 55.372 centimeters
ItemPackageDimensions_Length : 3.556 centimeters
ItemPackageDimensions_Width : 55.118 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : copper-tubes
Manufacturer : Wieland Copper Products, LLC
Material : Copper
ModelNumber : mtf220429xt1553
NominalWallThickness : 0.6 month
PartNumber : b21032101ap0008
ProductDescription :

Cooling capillary tube for air conditioner / refrigerator / freezer

Our red copper pipes have good electrical and thermal conductivity, excellent cutting performance, excellent ductility, and excellent sealing properties. They are easy to heat and cold press, and have uniform color. They can be used for welding, punching or secondary processing.

Red copper is cut with professional cutting tools, the cutting surface is free of impurities, and both ends are equipped with dust caps to keep the copper tube clean, smooth surface.

 

Used to make handicrafts

Red copper has bright color, smooth surface, high reliability, easy to connect to other parts, environmentally friendly materials, and can be recycled and reused.

 

Note:

The artwork needs to be polished with sandpaper first, otherwise the surface will rust and affect the appearance.

When red copper pipes need to be welded, the welding position should be polished before welding.

ProductSiteLaunchDate : 2019-09-11T20:39:51.673Z
Size : 2.5 Inch
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40142000