Cart 2 india

Specification
Brand : Pedersean
BulletPoint1 : 【High-level Trigger】- In industrial control, it is called PNP trigger, trigger, that is, when the voltage between the trigger terminal and the negative pole of the power supply reaches the voltage of the trigger condition, the relay is closed.
BulletPoint2 : 【Product Principle】- CH1 When the CH terminal has 3.3-5V, it can trigger the solid state relay to turn on; DC- When the CH terminal has 0-2.5V, the solid state relay is disconnected.
BulletPoint3 : 【High Sensitivity 】- The use of the product expansion capability, can be used for all types of DIY. Stable performance of electronic components, so that your equipment can work stably.
BulletPoint4 : 【Safe Use】- Equipped with fuse to ensure the safe use of this module. DC +: power supply; DC-: power negative.
BulletPoint5 : 【CH Terminal】- The CH terminal is the trigger terminal of the module. When there is a trigger signal, the output switches of the solid state relay will close. The load will be conductive.
BulletPoint6 : Rated frequency 50/60Hz
BulletPoint7 : Rated short circuit connecting ability Icm (Peak) 9.18KA 6.615KA
Color : One Color
Department : unisex-adult
ExternallyAssignedProductIdentifier : 7641027192526
ItemName : Relay Module, 8 Channel 2A 5V High-Level Trigger State Relay Board Equipped with Fuse, for All Types of DIY
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : generator-transfer-switches
Manufacturer : Pedersean
Material : polyamide
ModelName : EAWZOYJAJ
ModelNumber : EAWZOYJAJ
NumberOfItems : 1
PartNumber : EAWZOYJAJ
ProductDescription : Feature:
1. DC+ and DC- are used to to the power supply of the module, the voltage is optional 5V
2. The CH terminal is the trigger terminal of the module. When there is a trigger signal, the output switch of the solid state relay will be closed. The load is electrically conductive.
3. The meaning of low-level trigger:
Low-level trigger is called PNP trigger in industrial control, negative trigger, that is, when the voltage between the trigger terminal and the negative pole of the power supply is 0V or close to 0V, the relay is closed.
CH1 When the CH terminal has 0-2. 5V, the solid state relay can be triggered to turn on
DC- When the CH terminal has 2.5-5V, the solid state relay is disconnected
Specification:
Type: 8 Channel
Rated current: 2A
Rated voltage: 5V
Weight: 70g / 2.5oz
Package list:
1 * Relay Module
Note:
The actual product color may deviate from the photo due to light.
There may be a slight deviation in the measurement of product.
ProductSiteLaunchDate : 2025-05-05T02:59:07.187Z
Size : One Size
UnitCount : 1
UnspscCode : 39122200