Cart 2 india

Specification
Brand : OONO
BulletPoint1 : OONO F-1063N Manual and automatic transfer switch, an easy to mount 15 Amp inline transfer module provides switching between AC IN1 (Inverter or Generator) and AC IN2 (Utility or Shore Power) AC source. With input and output and switch status indicators. It has a manual power switch function, which can quickly control the on and off of the output. With the function of automatic and manual working mode, the product can work in automatic mode, and the input source can also be selected manually.
BulletPoint2 : Automatic mode (MODE switch set to AUTO): when AC IN2 (Utility or Shore Power) is powered, the load power will be switched to AC IN2, when AC IN2 is powered off, the load power will be switched to AC IN1 (Inverter or Generator). Manual mode (MODE switch set to SW1 or SW2): You can manually select AC IN1 (Inverter or Generator) or AC IN2 (Utility or Shore Power) as the input source according to your needs.
BulletPoint3 : Operating voltage AC 90 to 135V 50/60Hz. Maximum current 15 Amp. Transfer time less than 30mS (0.03 second), for most smart devices or computers, the switching action of 30mS time will not affect their normal operation.
BulletPoint4 : Internal four high power SPST relays switch design, effectively avoid the problem of DPDT relay high inductive load arcing. Live and Neutral wire are switched at the same time. The Ground wires of the two inputs and output are connected together internally and will not follow the switch on and off.
BulletPoint5 : IP66 waterproof level design, suitable for indoor or outdoor use. AC IN1, AC IN2 and AC OUT cables: Length 19 inches (0.5 meter), 14AWG (2.08 square millimeter) x 3 cores.
CircuitType : 2-way
Color : Black
ConnectivityProtocol : X-10
ConnectorType : Plug In
ControllerType : power
ControlMethod : touch
CurrentRating : 15 amps
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 6954525633417
ExternallyAssignedProductIdentifier1 : 815181010188
ExternallyAssignedProductIdentifier2 : 0815181010188
ExternallyAssignedProductIdentifier3 : 00815181010188
FinishType : Powder Coated
IncludedComponents : ATS Auto Transfer Switch
InstallationType : Screw-In
InternationalProtectionRating : IP66
ItemDisplayWeight : 5.83 pounds
ItemName : Manual and Automatic Transfer Switch, AC120V 15A ATS Auto Transfer Switch
ItemPackageDimensions_Height : 3.15 inches
ItemPackageDimensions_Length : 9.25 inches
ItemPackageDimensions_Width : 6.69 inches
ItemPackageQuantity : 1
ItemTypeKeyword : generator-transfer-switches
LightType : LED
Manufacturer : CZH-LABS
Material : Plastic
MaximumCurrent : 30 amps
ModelName : Start On Off Switch
ModelNumber : F-1063
MountingType : Wall Mount
NumberOfCircuits : 16
NumberOfItems : 1
NumberOfPositions : 2
OperatingVoltage : 120 volts_of_alternating_current
OperationMode : [MANUAL-AUTO]
PartNumber : F-1063N
ProductDescription : 1, OONO F-1063N Manual and automatic transfer switch, an easy to mount 15 Amp inline transfer module provides switching between AC IN1 (Inverter or Generator) and AC IN2 (Utility or Shore Power) AC source. With input and output and switch status indicators. It has a manual power switch function, which can quickly control the on and off of the output. With the function of automatic and manual working mode, the product can work in automatic mode, and the input source can also be selected manually.
2, Automatic mode (MODE switch set to AUTO): when AC IN2 (Utility or Shore Power) is powered, the load power will be switched to AC IN2, when AC IN2 is powered off, the load power will be switched to AC IN1 (Inverter or Generator). Manual mode (MODE switch set to SW1 or SW2): You can manually select AC IN1 (Inverter or Generator) or AC IN2 (Utility or Shore Power) as the input source according to your needs.
3, Operating voltage AC 90 to 135V 50/60Hz. Maximum current 15 Amp. Transfer time less than 30mS (0.03 second), for most smart devices or computers, the switching action of 30mS time will not affect their normal operation.
4, Internal four high power SPST relays switch design, effectively avoid the problem of DPDT relay high inductive load arcing. Live and Neutral wire are switched at the same time. The Ground wires of the two inputs and output are connected together internally and will not follow the switch on and off.
5, IP66 waterproof level design, suitable for indoor or outdoor use. AC IN1, AC IN2 and AC OUT cables: Length 19 inches (0.5 meter), 14AWG (2.08 square millimeter) x 3 cores.

SPECIFICATIONS:
* Input or Output Voltage: ………………………… AC 90 - 135V 50/60Hz.
* Maximum Current: ……………………………….. 15 Amp.
* Transfer Time: …………………………………..... 30 millisecond.
* Input / Output Cable Length: …………………… 19 inches (0.5 meter).
* Enclosure Waterproof Rating: …………………. IP66.

ProductSiteLaunchDate : 2016-04-22T07:00:00.000Z
Size : ONE CIRCUIT 15A 125V
SpecificationMet : Energy Rating
SpecificationMet1 : NEMA
SpecificationMet2 : ETL
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SwitchType : Rocker
TerminalType : Screw
UnitCount : 1
UnspscCode : 39122200
UpperTemperatureRating : 70 degrees_celsius
Voltage : 125 volts
Wattage : 1800 watts