Cart 2 india

Specification
Amperage : 50 amps
Brand : EIMSOAH
BulletPoint : Includes full manufacturer warranty
BulletPoint1 : STANDARD 35MM RAIL MOUNTING: Our generator switch transfer is suitable for 50 or 60Hz AC rated 110V 100A emergency power supply system, with standard 35mm rail mounting, which is convenient for installation and maintenance.
BulletPoint2 : CONTINUOUS POWER SUPPLY: Our generator transfer switches is mainly used to detect whether the normal power supply or backup power supply is normal. The working principle of the automatic transfer switch is that when the normal power supply is abnormal, the standby power supply works immediately to ensure the continuity of power supply. When the normal power supply is turned on, it will automatically switch back to the normal power supply from the standby power supply.
BulletPoint3 : 2 OPERATION MODES: Our double power automatic transfer switch can be operated automatically or manually, millisecond switching without interruption (Operation changeover time: ≤50ms). Check the integrity of the ATS before installation, turn the ATS on or off with the operating handle, check the flexibility of the drive and test the generation and disconnection conditions for each stage of load for normal and standby power.
BulletPoint4 : FLAME RETARDANT MATERIAL: Our auto transfer switch adopts flame retardant PC material, with good insulation and high temperature resistance, and silver contact anti aging, safe, reliable and anti interference. With compact structure, reliable transmission, which is easy to install and maintain. It also has a perfect protection function, including short circuit protection, overload protection, phase failure protection and under voltage protection.
BulletPoint5 : APPLICATION: Designed for domestic rail mounting and for use in PZ30 distribution boxes. The automatic transfer switch is suitable for a variety of occasions that do not allow continuous power failure, such as home, shopping mall, factory, laboratory, farm, etc.
CircuitBreakerType : Standard
CircuitType : 2-way
Color : BLACK
CompatibleDevices : All
ConnectivityProtocol : Insteon
ConnectorType : Plug In
ControlMethod : touch
CurrentRating : 100 amps
ExternallyAssignedProductIdentifier1 : 815181012250
ExternallyAssignedProductIdentifier2 : 0815181012250
IncludedComponents : NO
InternationalProtectionRating : IP54
ItemName : EIMSOAH Automatic Transfer Switch, AC110V 100A Dual Power Generator Transfer Switch with 35mm Rail Mounting, 2P ATS Transfer Changeover Switch, 50HZ/60HZ Din Rail Type for PZ30 Laboratory Farms
ItemPackageDimensions_Height : 3 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemTypeKeyword : generator-transfer-switches
LightType : Non-Illuminated
Manufacturer : EIMSOAH
Material : Polycarbonate
ModelName : 50 Amp
ModelNumber : ba6929d6-802f-40a3-ae35-8c9e3e72f3ac
MountingType : DIN Rail Mount
NumberOfItems : 1
NumberOfPoles : 4
NumberOfPositions : 2
OperatingVoltage : 110 volts_of_alternating_current
OperationMode : Automatic, Manual
PartNumber : /
PowerPlugType : type_b_3pin_na
ProductDescription : Specification Item Type: Dual Power Automatic Transfer Switch Material: PC, silver Switch Type: Secondary power distribution Rated Current: 100A Rated Voltage: 110VAC Insulation Voltage: 690VAC Rated Frequency: 50Hz 60Hz Electrical Grade: PC grade isolation type Rated Impact Withstand Voltage: 8KV Touch Time: <50ms Operation Conversion Time: <50ms Return Time: <50ms Closing Time: <50ms How to Use Check the integrity of the ATS before installation, turn the ATS on or off with the operating handle, check the flexibility of the drive and test the generation and disconnection conditions for each stage of load for normal and standby power. Package List 1 x Dual Power Automatic Transfer Switch Note 1. The maximum surrounding temperature shall not exceed 40℃, the minimum shall not be lower than ‑5℃, and the average temperature within 24 hours shall not be higher than 35℃ 2. The altitude of the installation site should not be higher than 2000m 3. When the maximum temperature reaches 40℃, the relative humidity of the installation site should not exceed 50%; when the temperature is the lowest temperature ‑5℃, the relative humidity is higher, for example, the temperature is 25℃, and the relative humidity is 90%. Due to temperature changes, special measures should be taken to deal with the occasional condensation on the surface of the product
ProductSiteLaunchDate : 2024-03-28T08:38:14.656Z
SkipOffer : 1
SpecificationMet : No
SpecificationMet1 : NEMA
SpecificationMet2 : ETL
SupplierDeclaredDgHzRegulation : not_applicable
SwitchType : Push Button
TerminalType : Screw
TotalPowerOutlets : 1
UnitCount : 1
UnspscCode : 39122200
UpperTemperatureRating : 99.98 degrees_celsius
Voltage : 1 volts
Wattage : 11000 watts