Cart 2 india

Specification
AutomotiveFitType : vehicle_specific_fit
AutoPartPosition : right
Brand : ShoreLand'r
BulletPoint1 : 6-Function Under 80" Combination Taillight
BulletPoint2 : Designed for a variety of under 80" light-duty trailers
BulletPoint3 : Quick connect and disconnect wiring
BulletPoint4 : Right/Curbside
BulletPoint5 : Dimensions: 4 3/4" x 4 1/2" x 2 9/16"
Color : Red
CompatibleWithVehicleType : Car
CustomerPackageType : Standard Packaging
ExteriorFinish : Painted
ExternallyAssignedProductIdentifier : 5065015032410
ExternallyAssignedProductIdentifier1 : 053522030604
ExternallyAssignedProductIdentifier2 : 783192021427
ExternallyAssignedProductIdentifier3 : 0783192021427
ExternallyAssignedProductIdentifier4 : 0053522030604
ExternallyAssignedProductIdentifier5 : 00783192021427
FitType : Universal Fit
IncludedComponents : Black Right Marine Tail Light
IsAssemblyRequired : 1
ItemDisplayDimensions_Height : 6 inches
ItemDisplayDimensions_Length : 6 inches
ItemDisplayDimensions_Width : 6 inches
ItemName : Shorelander 5110569 Submersible LED Right Side Tail Light for Boat Trailers
ItemPackageDimensions_Height : 11.43 centimeters
ItemPackageDimensions_Length : 22.86 centimeters
ItemPackageDimensions_Width : 17.272 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : boat-trailer-lights
Manufacturer : Draw-Tite
Material : Plastic
ModelName : 2823284
ModelNumber : 2823284
ModelYear : 5110569
NumberOfBoxes : 1
NumberOfItems : 1
OemEquivalentPartNumber : FCJL2823284
PackageLevel : unit
PartNumber : 5110569
PartTypeId : 0000
ProductDescription : Our boat trailer light set is designed to keep your trailer lights out of the water by easily mounting on your guide posts and poles. Saltwater tested IP67 Rated Lights that are DOT SAE Approved for trailer use. Our lights have evening running light capability and turn and brake capability. Our lights feature upgraded marine tinned copper wire that will not quickly degrade like the majority of wire on the market. Designed to fit on 2inch PVC guide posts with a 2.36 inch opening in the base. Our two light set comes with everything you need to install. Stainless screws, heat shrink butt connectors and wire ties to secure any excess wire. 1)Federal regulations require that trailer lights be no higher than 72” off the ground. Remove existing cap, or cut if glued on. Double check and cut to achieve a light height that is appropriate. 2) Test fit light, then fish the three wires down the existing pole. There are three color wires on each light (White, Black, Red). FOLLOW: A- WHITE WIRE = Ground Wire, commonly connected to the trailer frame. Use included stainless screws if needed. B- BLACK WIRE = Tail / Running Lights (On most trailers if using existing wiring, connect to BROWN COLOR WIRE. C- RED WIRE = Brake Stop + Turn Signal (Driver / Left side connect to YELLOW) (Passenger / Right side connect to GREEN) IP67 Rating - Sealed entry designed to withstand saltwater spray and moisture Voltage: 9-13.5vDC | PER EACH LIGHT = Current Draw (.19A@12.5V) | | Watts: 2.3 Watts at 12.5V Dimensions : 11” Height, 3” maximum width, Wire Length : 10’ Approx | Designed for 2” PVC Poles (2-3/8” OD) LED Lights meet DOT/SAE/STI 16 Standards Marine Grade Tinned Wire | Stainless Mounting Screws Included | Blue Heat Shrink Connectors Included | Tie Wraps Included For Wires
ProductSiteLaunchDate : 2020-08-20T18:07:20.415Z
Size : No Size
SpecificUsesForProduct : Rear Lights
Style : Left
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25172900
Voltage : 12 volts_of_direct_current
WarrantyDescription : Manufacturer Warranty
Wattage : 4.6 watts