Cart 2 india

Specification
BatteriesIncluded : 1
BatteriesRequired : 1
Brand : FTVOGUE
BulletPoint1 : The rotating torsion sensor can display the current measured torsion value and speed value in real time, and can directly calculate the current power value.
BulletPoint2 : Support RS485 communication, and support active upload protocol, communication rate up to 500 times per second.
BulletPoint3 : Can perform simple calibration, zero adjustment, filtering and other operations, allowing 200% overload.
BulletPoint4 : Using strain gauge electrical measurement technology, the electrical of the elastic shaft torsion can be measured by supplying power to the strain bridge.
BulletPoint5 : Widely used in the detection of torsion, speed and power of motors, generators, reducers, and engines.
Color : Red
ExternallyAssignedProductIdentifier : 9589190573040
ExternallyAssignedProductIdentifier1 : 0827674207425
ExternallyAssignedProductIdentifier2 : 827674207425
IncludedComponents : ● 1 x Optical Fiber Identifier ● 1 x Mini Screwdriver
ItemName : Dynamic Torsion Sensors, DC24V Rotating Torsion Sensor for Motor Generator Speed Measuring (0-100N.M)
ItemPackageDimensions_Height : 19 centimeters
ItemPackageDimensions_Length : 31 centimeters
ItemPackageDimensions_Width : 22 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : torque-gauges
Manufacturer : FTVOGUE
Material : Stainless Steel
MeasurementAccuracy : Wavelength range(nm): 800～1700
ModelName : FTVOGUEnhf9p30gxe-18
ModelNumber : FTVOGUEnhf9p30gxe-18
NumberOfItems : 1
PartNumber : FTVOGUEnhf9p30gxe-18
PowerSourceType : Battery Powered
ProductDescription : 1. The rotating torsion sensor can display the current measured torsion value and speed value in real time, and can directly calculate the current power value.
2. Support RS485 communication, and support active upload protocol, communication rate up to 500 times per second.
3. Using strain gauge electrical measurement technology, the electrical of the elastic shaft torsion can be measured by supplying power to the strain bridge.
4. Can perform simple calibration, zero adjustment, filtering and other operations, allowing 200% overload.
5. The rotating torsion sensor has an accuracy of more than 1/1000 and has excellent zero position stability.
6. Widely used in the detection of torsion, speed and power of motors, generators, reducers, and engines.

Specification:
Item Type: Rotating Torsion Sensor
Material: Stainless steel
Model: DYN-210
Speed Range: ≤15000rpm
Speed : 120/60/10pulse/r, 4-20mA, 0-20mA, 0-5V, 0-10V
Torsion : 5-15KHz
Zero Output: ±2%F.S.
Non Linearity: 0.1%F.S.
Hysteresis: 0.5%F.S.
Repeatability: 0.2%F.S.
Creep (30 Minutes): 0.03%F.S.
Temperature Sensitivity Drift: 0.01%F.S./10℃
Zero Temperature Drift: 0.01%F.S./10℃
Response Time: 0.6ms (50% response)
Response Frequency: 1kHz
Maximum Torsion Angle: 2.60 x 10rad (0.149°)
Moment of Inertia: 0.38kg/cm
Rotor Vibration Frequency: 19.4kHz
Torsion Constant: 3.85 x 10Nm/rad
Annual Stability: 0.3%/year
Load Resistance: >2kΩ
Working Voltage: DC24V 0.2A
Current Consumption: Working Environment: -10-50℃ 0-85%RH
Overload: 200%
Cable Tension: 10kg

packing list:
1 x Rotating Torsion Sensor
1 x Chinese English User Manual

Note:
1. Strictly forbidden to disassemble or knock accurate instruments.
2. When turning on the power, make sure that other wires are not short circuited.
3. When the no load torsion value of the installation test is large, adjust the coaxiality of the
ProductSiteLaunchDate : 2024-01-30T19:47:00.054Z
Size : 0-100N.M
Style : 0-100N.M
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 41110000