Cart 2 india

Specification
Brand : ATO.COM
BulletPoint1 : ATO rotary torque transducer with 7 pin waterproof circular connector and 3m cable can measure both forward and reverse torque, ATO torque sensor can directly output standard signal to PLC, DCS and other automation control systems, **Output Signal--- 4-20mA
BulletPoint2 : 【Lowest Measured Value (Nm)】The non-linearity of ATO Digital non-contact rotary torque sensor : 0.1%FS (Lowest Nm=Accuracy 0.001 * Capacity)
BulletPoint3 : 【LCD Display 】Dynamic torque sensor, power supply: DC 24V, LCD display can show torque, speed and power value at the same time
BulletPoint4 : 【Starting Torque】Dynamic torque sensor adopts two NSK shafts to ensure starting torque as low as 0.00001 Nm
BulletPoint5 : 【Customer First 】You will be enjoyed to get free tech support on how to choose, how to wire, how to commissioning with ATO professional engineers. If you have any issue about the product or service, please don't hesitate to consult us
IncludedComponents : 1*Digital Rotary Torque Sensor, 1*User Manual
ItemName : ATO Digital Rotary Torque Sensor, 500Nm Torque Transducer, Dynamic Torque Sensors with LCD Display, Rotary Torque Transducer for Motor Speed Measurement (Output Signal 4-20mA) (Capacity: 500 Nm)
ItemPackageQuantity : 1
ItemTypeKeyword : torque-gauges
Manufacturer : ATO
Material : 500 Nm
MeasurementAccuracy : 0.1%FS (Accuracy 0.001 * Capacity=Lowest Nm)
NumberOfItems : 1
PartNumber : TQS-D03-01-01
ProductDescription :

ATO Digital rotary torque sensor with LCD display has the capacity range from 0.1 Nm/0.3 Nm/1 Nm/5 Nm/10 Nm/300 Nm/1000 Nm to 10000 Nm. 

ATO Non-Contact Dynamic Force Sensor Specification:

Display LCD display (show torque/speed/power value)

Non-linearity 0.1%FS (Accuracy 0.001 * Capacity=Lowest Nm)

Hysteresis 0.03%FS

Repeatability 0.03%FS

Temperature drift on zero ＜0.01%FS/℃

Temperature effect on output ＜0.01%FS/℃

Power supply DC 24V

Consumption current ＜150mA

Load resistance ≥2kΩ

Output torque signal * 4-20mA

Software Option* Including software and USB to RS485 cable, you can install software on your computer (Win 8/ Win 10 system) to monitor torque data and graphs.

Output speed 60 pulse per revolution (OC output is standard configuration, and 5V TTL output is optional)

Response performance 1kHz

Signal delay 0.6ms

Ultimate overload 200%FS

Rated speed 10000rpm

Maximum speed 15000rpm

Protection grade IP43

Maximum Deformation 0.149°/1Nm at 2.60*10rad (The maximum deformation angle generated by 1Nm at 2.6*10rad rotation arc is 0.149°)

Inertia moment 0.38kg·cm

Natural vibration frequency 19.4kHz

Torsion constant 3.85*10Nm/rad

Elastic element material 17-4 stainless steel

Operating temperature -10℃~+70℃ (14~158℉)

Humidity 0~85%RH

Electrical connection 7 pin waterproof circular connector

Cable length 3m (Φ5mm)

ProductSiteLaunchDate : 2023-06-30T07:44:52.369Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 41110000