Cart 2 india

Editorial Review
Counterbores the back of a 5/16"-diameter peghole to fit Grover and Gotoh sealed gear housing.For Grover and Gotoh sealed tuners! Here's a tip from our luthier friend Bryan Galloup: Grover and Gotoh tuners with threaded bushings should be installed in counterbored pegholes. A snug 5/16" diameter at the top of the hole stops the bushing from leaning under string pull, thus helping to protect the lacquer finish around the bushing washers. At Bryan's suggestion, we developed this special slow-speed steel reamer that accurately counterbores the bottom of the peghole to fit the gear housing.The reamer has a .310"-diameter (7.87mm) pilot and two flutes that cut a .397"-diameter (10.08mm) counterbore in a 5/16"-diameter (7.94mm) peghole. When the reamer's piloted end is flush with the face of the peghead, the correct counterbore depth has been reamed.

Features
1) This custom-size reamer counterbores the back of a 5/16"-diameter peghole to fit Grover and Gotoh sealed gear housing
2) We developed this special slow-speed steel reamer to accurately counterbore the bottom of the peghole to fit the gear housing
3) Our high-quality reamers cut a clean, accurate counterbore for a professional job every time
4) Designed for slow-speed use in your drill press
5) Has a .310"-diameter (7.87mm) pilot and two flutes that cut a .397"-diameter (10.08mm) counterbore in a 5/16"-diameter (7.94mm) peghole

Specification
Brand : StewMac
Label : StewMac
Manufacturer : StewMac
Model : #AN2059
ProductGroup : Musical Instruments
ProductTypeName : INSTRUMENT_PARTS_AND_ACCESSORIES
Publisher : StewMac
Studio : StewMac
Title : StewMac Rear Peghole Reamer