Cart 2 india
In2Cart
Rs. 0
0
Product Information
Editorial Review
This machined steel 2-step reamer is made specifically for enlarging a guitar endpin hole to accept a 15/32" or 1/2"-diameter endpin jack.It won't chip the finish, and it's semi-fluted to help keep the hole round.The 3/8" shank can be chucked in a hand drill for slow reaming. The upper 1" cutting length is 1/2" diameter; the 1" center section is 15/32" diameter, and the lower 2-5/8" section has a standard 5-degree endpin taper to 1/4".
Features
1) This 2-step reamer is made specifically for enlarging a guitar endpin hole to accept a 15/32" or 1/2"-diameter endpin jack
2) Won't chip your guitar's finish, and it's semi-fluted to help keep the hole round
3) Made of durable machined steel for years of use in your shop
4) Chuck the 3/8" shank in a hand drill for slow reaming
5) The upper 1" cutting length is 1/2" diameter; the 1" center section is 15/32" diameter, and the lower 2-5/8" section has a standard 5-degree endpin taper to 1/4"
Specification
Brand : StewMac
Label : StewMac
Manufacturer : StewMac
Model : #AN4323
ProductGroup : Musical Instruments
ProductTypeName : INSTRUMENT_PARTS_AND_ACCESSORIES
Publisher : StewMac
Studio : StewMac
Title : StewMac Endpin Jack Reamer
This machined steel 2-step reamer is made specifically for enlarging a guitar endpin hole to accept a 15/32" or 1/2"-diameter endpin jack.It won't chip the finish, and it's semi-fluted to help keep the hole round.The 3/8" shank can be chucked in a hand drill for slow reaming. The upper 1" cutting length is 1/2" diameter; the 1" center section is 15/32" diameter, and the lower 2-5/8" section has a standard 5-degree endpin taper to 1/4".
Features
1) This 2-step reamer is made specifically for enlarging a guitar endpin hole to accept a 15/32" or 1/2"-diameter endpin jack
2) Won't chip your guitar's finish, and it's semi-fluted to help keep the hole round
3) Made of durable machined steel for years of use in your shop
4) Chuck the 3/8" shank in a hand drill for slow reaming
5) The upper 1" cutting length is 1/2" diameter; the 1" center section is 15/32" diameter, and the lower 2-5/8" section has a standard 5-degree endpin taper to 1/4"
Specification
Brand : StewMac
Label : StewMac
Manufacturer : StewMac
Model : #AN4323
ProductGroup : Musical Instruments
ProductTypeName : INSTRUMENT_PARTS_AND_ACCESSORIES
Publisher : StewMac
Studio : StewMac
Title : StewMac Endpin Jack Reamer
