Cart 2 india
In2Cart
Rs. 0
0
Product Information
Editorial Review
Finally, a low-cost, professional solution to achieving nice, straight fret slots!; This miter box kit was designed by Ben "C. B. Gitty" Baker specifically to make it easy to cut nice, straight slots in larger (up to 2 1/2" wide) guitar necks and fretboards! It was designed specifically to work with our own fretting saw, but you can use it with other thin-kerf saws as well. This miter box is laser-cut from 1/4" birch plywood and will stand up to long use if treated with care. Openings on the sides allow you to see how deep of a slot you have cut.; This miter box comes as a 3-piece kit, simply insert the tabs on the side pieces into the holes in the base piece (they may be a little snug, so be persistent but not overly forceful), squirt in a little glue, and you're good to go. Two mounting holes for screwing the miter box to a workbench or larger board are also included.; This miter box is designed specifically to work with 3/4" thick necks and 1/4" thick fretboards that are 2 1/2" wide or narrower. It will not work with any neck/fretboard over 2 1/2" in width. It can handle stock up to about 1 1/8" thick, though the slot depth windows don't extend up that far.; Photos showing the saw are for reference only
Features
1) Accommodates necks and Fretboards up to 2.5" Wide
2) Low cost solution for straight fret slots
3) Designed for thin kerf saws (not included)
4) Easy to Assemble
5) Perfect for Cigar Box Guitars and More!
Specification
Brand : C. B. Gitty
EAN : 0602589220154
Label : C. B. Gitty Crafter Supply
Manufacturer : C. B. Gitty Crafter Supply
PackageDimensions_Weight : 26.00 hundredths pounds
PackageDimensions : L:13.23 X W:3.31 X H:0.67
ProductGroup : Musical Instruments
ProductTypeName : INSTRUMENT_PARTS_AND_ACCESSORIES
Publisher : C. B. Gitty Crafter Supply
Studio : C. B. Gitty Crafter Supply
Title : Fretting Miter Box Kit for Guitar Necks & Fretboards up to 2.5" Wide
Finally, a low-cost, professional solution to achieving nice, straight fret slots!; This miter box kit was designed by Ben "C. B. Gitty" Baker specifically to make it easy to cut nice, straight slots in larger (up to 2 1/2" wide) guitar necks and fretboards! It was designed specifically to work with our own fretting saw, but you can use it with other thin-kerf saws as well. This miter box is laser-cut from 1/4" birch plywood and will stand up to long use if treated with care. Openings on the sides allow you to see how deep of a slot you have cut.; This miter box comes as a 3-piece kit, simply insert the tabs on the side pieces into the holes in the base piece (they may be a little snug, so be persistent but not overly forceful), squirt in a little glue, and you're good to go. Two mounting holes for screwing the miter box to a workbench or larger board are also included.; This miter box is designed specifically to work with 3/4" thick necks and 1/4" thick fretboards that are 2 1/2" wide or narrower. It will not work with any neck/fretboard over 2 1/2" in width. It can handle stock up to about 1 1/8" thick, though the slot depth windows don't extend up that far.; Photos showing the saw are for reference only
Features
1) Accommodates necks and Fretboards up to 2.5" Wide
2) Low cost solution for straight fret slots
3) Designed for thin kerf saws (not included)
4) Easy to Assemble
5) Perfect for Cigar Box Guitars and More!
Specification
Brand : C. B. Gitty
EAN : 0602589220154
Label : C. B. Gitty Crafter Supply
Manufacturer : C. B. Gitty Crafter Supply
PackageDimensions_Weight : 26.00 hundredths pounds
PackageDimensions : L:13.23 X W:3.31 X H:0.67
ProductGroup : Musical Instruments
ProductTypeName : INSTRUMENT_PARTS_AND_ACCESSORIES
Publisher : C. B. Gitty Crafter Supply
Studio : C. B. Gitty Crafter Supply
Title : Fretting Miter Box Kit for Guitar Necks & Fretboards up to 2.5" Wide
