Cart 2 india

Specification
Brand : Yuesstloo
BulletPoint1 : Yuesstloo crankshaft oil seal removal and installer kit is compatible with BMW N20, N26, N40, N42, N45T, N46, N46T, N52, N53, N54 & N55 engines.
BulletPoint2 : OEM Equivalent Part Number: 119181; 119182; 119183; 119184; 119185; 119220; 119230; 110370
BulletPoint3 : Used to remove and install the front and rear oil seal on the crankshaft. Comes with a carrying case and a pair of gloves. Convenient to carry and store.
BulletPoint4 : All parts are neatly placed in the case. Made of high-quality material, high hardness and strong, rustproof.
BulletPoint5 : Customer Satisfaction Service: If there is any problem with our products, you can get help from us. Customer satisfaction is our top priority.
BulletPoint6 : For industrial/occupational use only. Not for consumer sale or use.
Color : Blue Case
CustomerPackageType : Standard Packaging
ExteriorFinish : Steel
ExternallyAssignedProductIdentifier1 : 772467397244
ExternallyAssignedProductIdentifier2 : 0772467397244
ExternallyAssignedProductIdentifier3 : 00842729003081
ExternallyAssignedProductIdentifier4 : 4370600002015
ExternallyAssignedProductIdentifier5 : 0013317015919
ExternallyAssignedProductIdentifier6 : 0051135089781
ExternallyAssignedProductIdentifier7 : 0726064688434
ExternallyAssignedProductIdentifier8 : 00051135089781
ExternallyAssignedProductIdentifier9 : 50051135089786
FinishType : Powder Coated
FitType : Vehicle Specific
GpsrSafetyAttestation : 1
IncludedComponents : Car Folding Remote Key Pin Remover Tool
IncludedComponents1 : 20pcs Conversion Screw Adapters
IncludedComponents2 : Pneumatic Hammer
IncludedComponents3 : Puller Hook, Pneumatic Connector
IncludedComponents4 : Connect Tube and Valve
IncludedComponents5 : 2pcs Extension Rod and Screw
ItemDisplayDimensions_Height : 1.8 inches
ItemDisplayDimensions_Length : 11.7 inches
ItemDisplayDimensions_Width : 6.6 inches
ItemDisplayWeight : 7 pounds
ItemName : Yuesstloo Crankshaft Front Rear Oil Seal Remover Installer Kit, Compatible with BMW N20 N26 N40 N42 N45 N45T N46 N52 N53 N54 N55 Engine
ItemPackageDimensions_Height : 43.9928 centimeters
ItemPackageDimensions_Length : 13.0048 centimeters
ItemPackageDimensions_Width : 35.2806 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : mechanics-tool-sets
Manufacturer : Yuesstloo
Material : Alloy Steel
Material1 : Metal
Material2 : Alloy Steel
ModelName : Car Folding Remote Key Pin Remover Tool
ModelNumber : AVE-03
NumberOfBoxes : 1
NumberOfItems : 5
OperationMode : Mechanical
PackageLevel : unit
PartNumber : GJ-07-02
PartTypeId : 7584
ProductDescription :

Yuesstloo crankshaft oil seal removal and installer kit are used to remove and install the front and rear oil seal on the crankshaft.

Comes with a carrying case and a pair of gloves. Convenient to carry and store.

The tools are made of high-quality material, high hardness and strong.

 

Compatible with BMW N20, N26, N40, N42, N45T, N46, N46T, N52, N53, N54, N55 engines.

 

OEM Equivalent Part Number: 119181; 119182; 119183; 119184; 119185; 119220; 119230; 110370

 

Operation tips:

Step 1: Remove six E10 screws which fix the pulley on the crankshaft hub to remove the front pulley. Do not remove the crankshaft front bolt.

Step 2: Remove the valve cover and oil pan to clean all belts.

Step 3: Use the puller seal and puller screw to remove the oil seal. Screw the seal puller to the seal with your hand while applying pressure inward. Use the wrench to continue rotating the seal puller until it becomes difficult to rotate the wrench.

Step 4: Slowly turn the head of the seal puller bolt, and you will see the oil seal gradually appear. Continue to turn the bolt until the oil seal is fully pulled out. If the seal puller is released during this process, please repeat step 3.

Step 5: Apply engine oil to the hub and apply primer to the side of the cylinder.

Step 6: Install the seal pusher guide to the crankshaft hub.

Step 7: Install the seal pusher on the seal pusher guide with the open end of the seal pusher facing the engine. Align the groove of the seal with the connecting line in the engine block, so as not to damage the threads. Turn the nut to push the seal in.

Step 8: Make sure that the gasket is fully inserted, and use the sealant to fill the groove of the seal that is aligned with the connecting line of the engine body, then the installation is completed.

ProductSiteLaunchDate : 2023-10-17T06:49:33.850Z
Size : Car Key Pin Removal Tool
SpecificUsesForProduct : Automotive bumper repair
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 25170000
WarrantyDescription : 12 Months Warranty