Cart 2 india

Specification
AutomotiveFitType : vehicle_specific_fit
Brand : VISVIC
BulletPoint1 : SUPERIOR GRIP---This automotive tool set slots in perfectly to hold your camshaft firmly in position at top dead center just like OEM sets EN-46105 and EN-48383.
BulletPoint2 : SUPERIOR STRENGTH---These camshaft alignment tools are made from high-quality 45# structural steel for maximum strength and endurance.
BulletPoint3 : SUPERIOR DURABILITY---Our steel is galvanized with a zinc coating for improved longevity and corrosion resistance.
BulletPoint4 : Fits 2.8L, 3.0L, and 3.6L V6 engine codes LP1, HFV6, A30XH, Z32SE, Z28NET, Z28NEL, A28NER, B284E, and B284L meaning that it fit for GMC Acadia, fit for Buick Lacrosse fit for Enclave, fit for Cadillac CTS, fit for SRX, and fit for STS; fit for Pontiac G6 Saturn Aura Outlook Vue Pontiac Torrent Chevy Malibu Camaro Equinox Traverse; Saab 9-3, 9-4X, and 9-5; and some Holden, Vauxhall, and Opel models.
BulletPoint5 : SATISFACTION GUARANTEED---backs these parts with its usual strong warranty and friendly customer service, ensuring that you'll enjoy their use for years to come.
Color : Black
CompatibleFastenerDescription : 0.5 inches
CustomerPackageType : Frustration-Free Packaging
DriveSystem : 1/2 inch drive
ExternallyAssignedProductIdentifier1 : 838780001371
ExternallyAssignedProductIdentifier2 : 100069443210
ExternallyAssignedProductIdentifier3 : 0838780001371
ExternallyAssignedProductIdentifier4 : 0100069443210
ExternallyAssignedProductIdentifier5 : 00838780001371
FinishType : Chrome-plated
FitType : Universal
GpsrSafetyAttestation : 1
IncludedComponents : Torx Tools
IsAssemblyRequired : 1
ItemDisplayWeight : 8.26 pounds
ItemName : VISVIC EN 48383 Camshaft Retaining Tool Replace EN 46105 Fit for Cadillac Buick Chevrolet Vauxhall Saab Pontiac Equinox Holden Saturn Cam Alignment Holding Kit for V6 2.8L 3.0L 3.6L Engines
ItemPackageDimensions_Height : 21.4884 centimeters
ItemPackageDimensions_Length : 2.0066 centimeters
ItemPackageDimensions_Width : 17.5006 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : mechanics-tool-sets
Manufacturer : dihanfs
Material : Metal
ModelName : ND-TK-COM017
ModelNumber : ND-TK-COM017
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces1 : 13
NumberOfPieces2 : 12
OeManufacturer : Caterpillar
OemEquivalentPartNumber1 : 9U6877
OemEquivalentPartNumber2 : 9U7258
OemEquivalentPartNumber3 : 221-9778
OemEquivalentPartNumber4 : 4K-0367
OemEquivalentPartNumber5 : 5P-8247
OperationMode : Mechanical
PartNumber : DF-A-XJ5072
ProductDescription :

---This cam retaining tool set works with the LP1, HFV6, A30XH, Z32SE, Z28NET, Z28NEL, A28NER, B284E, and B284L 2.8L, 3.0L, and 3.6L V6 car engines.

STEP 1

-Install EN-48383-1 to the rear of the left camshaft.

-Make sure that the EN-48383-1 is securely fitted on the camshaft.

-This permits the installation of the left secondary camshaft intermediate drive chain.

STEP 2

-Remove the EN-48383-1 from the rear of the left camshaft.

-Install EN-48383-2 to the rear of the left side cam wheel.

STEP 3

-Install EN-48383-3 to the rear of the right camshaft.

ProductSiteLaunchDate : 2022-01-13T02:09:58.504Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 25170000
WarrantyDescription : 1