Cart 2 india

Specification
Brand : Tegara
BulletPoint : WELD ON HOLDER FOR 1.00 SHANK AUGER TOOTH
BulletPoint1 : Bore Diameter: 5/8"
BulletPoint2 : Projection Length: 1.75"
BulletPoint3 : Nose Diameter: 1.755"
BulletPoint4 : Drawbar Thread Size: 5/8x11 UNC
BulletPoint5 : TIR (in): 0.0001, Max RPM Balanced to: G2.5 20,000
CutType1 : Rounded
CutType2 : Taper
ExternallyAssignedProductIdentifier : 1180371500008
GpsrSafetyAttestation : 1
IncludedComponents : Pin
ItemName : Tegara CAT40 5/8 in x 1.75 in. End Mill Tool Holder 2 pcs 202-7126G-2 P[
ItemPackageDimensions_Height : 21.0058 centimeters
ItemPackageDimensions_Length : 11.9126 centimeters
ItemPackageDimensions_Width : 16.51 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : tool-holders
Manufacturer : Shars Tool
Material : Alloy Steel
ModelName : 38640-MOQ3
ModelNumber : 202-7126G-2
NumberOfBoxes : 1
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : 202-7126G-2
ProductDescription : Tool holder is balanced to G2.5 20,000 RPM on a HAIMER Tool Dynamic Balancing System from Germany. Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing, minimize vibration and maximize the cutting tool's life cycle and greatly improve surface finish. Unique design feature in the flange to minimize the off-balance nature of CAT 40 taper specification. On the shoulder under the flange, a side is mill flat to compensate the weight of the metal chips lost from forming the spherical hole in the flange. This design allows the left side and right side of the holder to achieve 50-50 perfect weight distribution in its upright position, like the position inside a machine spindle. Symmetrical design in evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation. To achieve AT3 or better taper contact as an industry standard, our taper surface are precision ground on Shigiya CNC grinder from Japan. We are not satisfied with just meeting the industry standard, the surface roughness on the taper is maintained to mirror finish. The maximum torque is laser marked on the ER collet nut face to take the guess game out of the way to ensure proper amount of force should be applied while tightening. Innovative coating process significantly increases the clamping force by 75% compared to standard ER collet nut. More gripping force provides better rigidity and reduces the possibility of losing grip on the round shank which lead to expensive damage on cutting tools and work piece material.
ProductSiteLaunchDate : 2019-07-29T07:00:00.000Z
Size : BT40
Style : Standard
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation1 : Aluminum
SurfaceRecommendation10 : Fiberglass
SurfaceRecommendation11 : Brick
SurfaceRecommendation12 : Tile
SurfaceRecommendation13 : Masonry
SurfaceRecommendation14 : Mirror
SurfaceRecommendation15 : Concrete
SurfaceRecommendation16 : Stone
SurfaceRecommendation17 : Cast Iron
SurfaceRecommendation18 : Iron
SurfaceRecommendation19 : Brass
SurfaceRecommendation2 : Metal
SurfaceRecommendation20 : Ceramic
SurfaceRecommendation21 : Engineered Wood
SurfaceRecommendation22 : Polyvinyl Chloride
SurfaceRecommendation23 : Acrylonitrile Butadiene Styrene
SurfaceRecommendation24 : Nylon
SurfaceRecommendation25 : Porcelain
SurfaceRecommendation26 : Glass
SurfaceRecommendation27 : Pine
SurfaceRecommendation3 : Plastic
SurfaceRecommendation4 : Stainless Steel
SurfaceRecommendation5 : Wood
SurfaceRecommendation6 : Copper
SurfaceRecommendation7 : Alloy Steel
SurfaceRecommendation8 : Soil
SurfaceRecommendation9 : Acrylic
ToleranceHeld : Precision
UnitCount : 1
UnspscCode : 27112803