Cart 2 india

Specification
Brand : Mingdun
BulletPoint : 2pcs ER32 COLLET CHUCKS 1"X6" W. STRAIGHT SHANK,Tool Holder Set #ER32-CK1--new
BulletPoint1 : For CNC Milling. Material: 40CR, Bore Diameter: 1/8", Max RPM Balanced To: G2.5 20000 RPM, TIR (Inch): 0.0001”, Drawbar Thread Size: 5/8“-11, Noes Diameter: 0.75"
BulletPoint2 : Package Include:1 x CAT40 1/8 x 2.5" End Mill Tool Holder
BulletPoint3 : Tool holder is balanced to G2.5 20,000 RPM. Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing, minimize vibration and maximize the cutting tool's life cycle and greatly improve surface finish.
BulletPoint4 : Unique design feature in the extension nose to minimize the off-balance nature of CAT 40 taper specification. Evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation.
BulletPoint5 : All critical surface are precision ground Internal bore concentricity is less than 0.0001" from taper to end mill pocket. Flange and V-groove are precision ground to ensure reliable tool change.
Color : RED
CompatibleDevices : Lathe
ConnectorType : Coaxial
CutType : Taper
ExternallyAssignedProductIdentifier : 8278430110039
ExternallyAssignedProductIdentifier1 : 0732694105159
ExternallyAssignedProductIdentifier2 : 732694105159
ImportDesignation : Imported
IncludedComponents : 1 piece
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
ItemDisplayDimensions_Depth : 6.6 centimeters
ItemDisplayDimensions_Diameter : 13 centimeters
ItemName : Mingdun CAT40 1/8 x 2.5" End Mill Tool Holder Balanced G2.5 20000 RPM for CNC Milling US
ItemPackageDimensions_Height : 29.5 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 16.9 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : tool-holders
Manufacturer : Mingdun
Material : steel
ModelName : TBC-15-0750-B
ModelNumber : TBC-15-0750-B
NumberOfItems : 1
NumberOfPockets : 3
PartNumber : AM-MINGMQ0456
ProductDescription : Description:
For CNC Milling
1 x CAT40 1/8 x 2.5" End Mill Tool Holder
Material: 40CR
Bore Diameter: 1/8"
Max RPM Balanced To: G2.5 20000 RPM
TIR (Inch): 0.0001”
Drawbar Thread Size: 5/8“-11
Noes Diameter: 0.75"

Feature：
Tool holder is balanced to G2.5 20,000 RPM.
Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing, minimize vibration and maximize the cutting tool's life cycle and greatly improve surface finish.
Unique design feature in the extension nose to minimize the off-balance nature of CAT 40 taper specification.
On the side of flange where a half spherical hole is located, a flat is cut into the cylinder nose to compensate the weight of the metal chips lost from forming this spherical hole.
And when the holder is placed into the balance machine, less holes would need to be drilled in the v groove of the flange to protect the rigidity of the tool holder.
Evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation.
All critical surface are precision ground Internal bore concentricity is less than 0.0001" from taper to end mill pocket
Flange and V-groove are precision ground to ensure reliable tool change
Coolant thru spindle capability
ProductSiteLaunchDate : 2019-09-16T07:00:00.000Z
Size : 1-1/2 inches OD x 3/4 inches ID
SpecificationMet : IEC
Style : TBC
SupplierDeclaredDgHzRegulation : not_applicable
ToleranceHeld : Precision
UnitCount : 1