Cart 2 india

Specification
Brand : HHIP
BulletPoint1 : Rotary table diameter is 110mm or 3.94-Inch; Rotary table horizontal overall height is 70mm or 2.76-Inch; Rotary table vertical overall height is 70mm; Rotary table gear ratio is 36:1; Rotary table t-slot width is 7.95mm or 5/16-Inch with 4 t-slots
BulletPoint2 : The table has a 10 second vernier reading and one rotation of handle equals 10 degrees on the collar; The table worm gear is easily disengaged for free rotation, and it tilts 0-90 degrees
BulletPoint3 : The base for the table has two bolt holes that are 9.8mm or 0.386-inch in diameter; Also included is a 4" Rotary Table Vise The vise is made from hardened and ground tool steel.
BulletPoint4 : It is a low-profile vise with 4 mounting holes to easily attach to a rotary table; The vise has a v-groove for holding round parts; The vise also comes with mounting t-nuts and cap screws
BulletPoint5 : The vise T-nut slot is 16mm, the jaw width is 80mm, the jaw depth is 20mm and the jaw opening is 40mm; The vise base diameter is 106mm
ExternallyAssignedProductIdentifier1 : 769053116228
ExternallyAssignedProductIdentifier2 : 0769053116228
IncludedComponents : 4-Inch Tilting Rotary Table with Free Rotary Table Vise
ItemName : HHIP 9906-2338 4-Inch Tilting Rotary Table with Free Rotary Table Vise
ItemPackageDimensions_Height : 4 inches
ItemPackageDimensions_Length : 11 inches
ItemPackageDimensions_Width : 7 inches
ItemPackageQuantity : 1
ItemTypeKeyword : tool-holders
Manufacturer : HHIP
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 9906-2338
ProductSiteLaunchDate : 2024-06-25T20:23:40.857Z
Size : 4-Inch
SupplierDeclaredDgHzRegulation : not_applicable