Cart 2 india

Specification
Brand : Flame Tech
BulletPoint1 : OEM replacement tip for acetylene gas
BulletPoint2 : Compatible with airco torches
BulletPoint3 : 100 percent flame tested in the USA for great performance
BulletPoint4 : It is available in size 10
BulletPoint5 : 1 years of manufacturer
Color : X170-015
ExternallyAssignedProductIdentifier : 7018218951598
ExternallyAssignedProductIdentifier1 : 840126303254
ExternallyAssignedProductIdentifier2 : 0840126303254
IncludedComponents : 164-10
ItemName : FlameTech 164-10 Heavy Duty Standard Replacement Cutting Tip, Acetylene, Size 10, Airco Compatible, Tested in The USA
ItemPackageDimensions_Height : 9.6 centimeters
ItemPackageDimensions_Length : 1.7 centimeters
ItemPackageDimensions_Width : 1.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : gas-welding-tips
Manufacturer : Flame Technologies, Inc.
Material : Material
ModelName : 164
ModelNumber : 164-10
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 164-10
ProductDescription : Feature:
1. The cylinder body has a C shape notch on the upper and a U shape notch on the bottom with M8 screw holes, which is easy to install.
2. There is an inflation port on the side of the gas spring cylinder, which can also be used for pipe connection systems.
3. The initial spring pressure of 4200 series nitrogen gas spring is 42000N, with long stroke and stable operation.
4. With piston rod, the hardness is high after fine machining, and the surface roughness reaches about Ra0.02um.
5. Made of alloy material and adopts integral cutting and forming process, which is safer and more than pipe welding.


Specification:


Item Type: Nitrogen Gas Spring
Material: Alloy
Purpose: compression nitrogen gas cylinder
Cylinder Diameter: Approx. 95.2mm / 3.7in
Plunger Diameter: Approx. 60mm / 2.4in





Package List:
1 x Nitrogen Gas Spring

Note:
1. Do not use the nitrogen gas spring plunger rod for fixing, and the threaded hole at the end of the piston rod cannot be used as a lifting hole for lifting.
2. Do not modify the following aspects of the nitrogen gas spring:
(1)Drill holes on the cylinder block of the nitrogen gas spring, the sealing ring, etc.
(2)The piston rod is shortened in order to reduce the stroke
(3)Do not perform other processing on the nitrogen gas spring and its accessories
3. Do not use nitrogen gas springs for purposes outside the scope of product catalog specifications.
4. Do not allow the gas spring to return freely after being compressed, as this will cause damage to the internal structure.

ProductSiteLaunchDate : 2017-02-25T08:00:01.000Z
Size : Size 10
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27000000