Cart 2 india

Specification
Brand : MEETOOT
BulletPoint1 : Product type: soldering iron soldering sponge, soldering iron head cleaning cleaning tin removal dry sheet compressed high temperature resistant soldering iron sponge, made of thickened wood pulp sponge. Soak to 6mm/0.23 inch.
BulletPoint2 : Product usage: The spare sponge can be used with a soldering iron stand or with a temperature controlled soldering iron system. Before use, soak the sponge in water, expand it and squeeze out the excess water. Stack them when in use and discard only the top layer when soiled.
BulletPoint3 : Product features: this sponge is a special high temperature resistant sponge. It expands when it absorbs water and has a rough and porous surface, but is soft like cotton. It is specially used to remove the oxidised layer on the head of the soldering iron.
BulletPoint4 : Product size: 6x6x0.2cm/2.4inchx2.4inchx0.1inch (L x W x H).
BulletPoint5 : Wide range of applications: removing solder residues and keeping PCB assemblies clean.
Color : As Shown
Department : Unisex
ExternallyAssignedProductIdentifier : 4713047480457
GemType : no gemstone
IncludedComponents : 5x Solder Iron Tip Cleaner Sponge Pad
ItemForm : Wipes
ItemName : MEETOOT 10PCS Soldering Iron Head Cleaning Sponge 6x6CM Square High Temperature Soldering Platform Sponge Blue Soldering Cleaning Pad
ItemPackageDimensions_Height : 1.2 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 10
ItemTypeKeyword : soldering-tip-cleaners
Manufacturer : MEETOOT
Material : copper
MetalType : stainless-steel
ModelName : Soldering tip cleaner
ModelNumber : Solder iron sponge
NumberOfBoxes : 1
NumberOfItems : 5
PartNumber : 49810-SHTSW-6-10
PowerSourceType : hand_powered
ProductDescription : Specification:

Type: soldering iron cleaning sponge

Shape: square

Side length: 6cm

Thickness: 2mm

Material: PVA sponge

Colour: blue

Package include:10pcs soldering iron cleaning sponge

Operating instructions:
This sponge is a special high temperature resistant sponge, which expands after absorbing water and has a rough and porous surface, but is soft like cotton. It is specially used to remove the oxidised layer on the head of the soldering iron.

It is by the rough but soft surface of the soldering iron head above the oxidation layer and dirt rubbed off, is not the type of sandpaper like sanding, so do not worry about any wear and tear on the head of the soldering iron and damage.

Soldering iron used for a long time in the soldering iron head will have a layer of oxidation, resulting in the inability to melt the solder, or solder will not be attached to the head of the soldering iron, welding is very difficult. Often the tip of the soldering iron head is not tin, can not be soldered. I think all friends who have used the soldering iron have this experience. At this time, you can rub the soldering iron in this high temperature sponge a few times, the oxidised layer of the soldering iron head will be rubbed off, revealing the inside of the fresh soldering iron head, you can weld very well.
Usage:

Put the high temperature sponge into the water to soak for a while, and then squeeze out the excess water after expansion. Will burn hot soldering iron head in the above rub a few times, can be soldering iron head above the oxidation layer and slag completely removed.

After a long time of non-use, the water will evaporate and become dry, soak it in water again and use it again.
Note: Light exposure and different displays may cause the colour of the item in the picture to be slightly different from the real item. Measurement allows an error of 1 to 3cm.
ProductSiteLaunchDate : 2023-12-26T00:49:40.893Z
SettingType : 2-Prong-setting
SheetCount : 100
Size : 6X6cm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Electronics
UnitCount : 1