Cart 2 india

Specification
Brand : Kwalitistar
BulletPoint1 : ✅[Right for the job] This pipe cleaner prepares 1.0-inch copper tube for soldering / sweating.
BulletPoint2 : ✅[Internal locking mechanism] The newly-engineered internal locking mechanism improves the durability and reduces the likelihood of shank spinning relative to housing.
BulletPoint3 : ✅[Standard size] It works for 1.0-inch (nominal size, measured OD around 1(1/8)”) copper, bronze, and brass pipes.
BulletPoint4 : ✅[Used on power drills] The 1/4-in hex shank is compatible with most power drills. The brush is used at low speeds on power drills (not impact drivers), and is run in clockwise direction (not designed for counterclockwise direction). It makes the cleaning job much easier and faster.
BulletPoint5 : ✅[Tools for everyone] It is a tool set for homeowners, DIYers, plumbers, and contractors etc.
CompatibleMaterial : Copper
ExternallyAssignedProductIdentifier : 6974443673920
IncludedComponents : Power Pipe Cleaner
IncludedComponents1 : 1x YIHUA 200C Compact Motorized Soldering Tip Cleaner
IncludedComponents2 : 6 x Brass Wool Brushes
IncludedComponents3 : 1x 12V Power Adapter
IncludedComponents4 : 1x Pry Bar - Lightweight Soldering Iron Tip Cleaning Tool
ItemName : 1.0-Inch Copper Pipe Cleaner for Power Drill, Model InerLok100, 1-in Tube Cleaning Brush, Cleans Copper / Bronze / Brass Pipes and Tubes for Soldering, w/ Stainless-Steel Wire Bristles and 1/4” Shank
ItemPackageDimensions_Height : 7.7978 centimeters
ItemPackageDimensions_Length : 5.7912 centimeters
ItemPackageDimensions_Width : 5.7912 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : soldering-tip-cleaners
Manufacturer : Kwalitistar
Material : Brass
ModelName : InerLok
ModelNumber : InerLok100
NumberOfBoxes : 12
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : InerLok100-1
PowerSourceType : ac
ProductDescription : Kwalitistar’s model InerLok100, 1.0-inch copper pipe cleaner, features a newly-engineered internal locking mechanism that anchors the brush housing and drive shank tightly. This update improves the durability of plastic housing and reduces the likelihood of shank spinning relative to housing. The InerLok100 copper pipe cleaner is designed to clean copper / bronze / brass pipes and tubes with a diameter of 1.0-inch (nominal size 1.0”, measured OD around 1(1/8)”). The 1/4-inch shank on the brush fits most power drills. It cleans copper, brass, and bronze pipes and tubes for subsequent fluxing, soldering, sweating, brazing, or welding. Brush bristles are made with stainless-steel wires for effective cleaning. It is a tool for homeowners, DIYers, plumbers, and contractors, etc. Instructions: 1. Safety first: please ensure necessary precautions & wear appropriate PPE that includes, but is not limited to, safety goggles, protective gloves, face masks, etc. 2. Use the pipe cleaning brush only on a power drill, not an impact driver. Impact driver may cause damage to the tool or parts. 3. Set the drill to run at a low speed to avoid high torques. Low speed is sufficient to effectively clean pipes / tubes. 4. Make sure the drill is set to run in the clockwise direction. The brush is not designed to run counterclockwise. 5. Align the axis of the brush and pipes / tubes while using the tool. 6. Keep the drill running while inserting the pipe / tube and removing it from the brush. Do not reverse the direction of the drill at any point during the process.
ProductSiteLaunchDate : 2024-02-06T05:36:56.013Z
Style : (1.0") Pipe Cleaner
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1