Cart 2 india

Specification
Brand : SEIWEI
BulletPoint : Replacement Part
BulletPoint1 : 【Cleaning Soldering Residue】The soldering iron tip needs to be heated before each start of soldering, so that the surface of the solder on the iron tip will have an oxide layer. In addition, residues such as rosin or petroleum jelly flux will also become dirt attached to the surface of the soldering tip.
BulletPoint2 : 【Environmental Protection and Safety】This sponges for cleaning the soldering iron does not contain sulphur, avoiding the reaction of sulphur and metal under high temperature conditions to generate sulphide.
BulletPoint3 : 【High Temperature Resistance】The material of the soldering iron sponge determines the characteristics of good water absorption and high temperature resistance. This high temperature resistant sponge has dense holes on the surface, and after full soaking the soaking factor is high, the thickness increases significantly to 8mm-10mm/0.32inch-0.39inch.
BulletPoint4 : 【How to Use】First let the cleaning sponge absorb enough water, then squeeze out the excess water, retaining seventy percent of the water, wipe the already heated soldering iron tip on the cleaning sponge a few times, and when you see the soldering iron tip reveal its glossy you can continue soldering.
BulletPoint5 : 【Application Scenario】It can be placed on the soldering iron stand and is suitable for all kinds of electrical/precision instrumentation soldering work. If you are an engineer, repairer, electronic product enthusiast, then this soldering iron sponge is definitely the right choice for you.
Color : Blue
ExternallyAssignedProductIdentifier : 7592480041497
ExternallyAssignedProductIdentifier1 : 0889044258208
ExternallyAssignedProductIdentifier2 : 889044258208
FinishType : Finish
IncludedComponents : inc
ItemDisplayDimensions_Height : 1.38 centimeters
ItemDisplayDimensions_Length : 2.13 centimeters
ItemDisplayDimensions_Width : 2.09 centimeters
ItemName : 10 Pack Soldering Iron Sponge, Soldering Sponge Solder Tip Cleaning Sponge High Temperature Rresistant Sponge 2.17"×2.17" Blue
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 34 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : soldering-tip-cleaners
Manufacturer : SEIWEI
Material : Material
Material1 : Metal
Material2 : Iron
ModelName : Kuidamosmp4sygwdki
ModelNumber : KUIDAMOSmp4sygwdki
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : CXR-RT-230822A1
PowerSourceType : PowerSource
ProductDescription : Feature:
1. The soldering iron tip needs to be heated before each start of soldering, so that the surface of the solder on the iron tip will have an oxide layer. In addition, residues such as rosin or petroleum jelly flux will also become dirt attached to the surface of the soldering tip.
2. This sponges for cleaning the soldering iron does not contain sulphur, avoiding the reaction of sulphur and metal under high temperature conditions to generate sulphide, so it will not damage the tip of the soldering iron.
3. The material of the soldering iron sponge determines the characteristics of good water absorption and high temperature resistance. This high temperature resistant sponge has dense holes on the surface, and after full soaking the soaking factor is high, the thickness increases significantly to 8mm-10mm/0.32inch-0.39inch, which can quickly absorb the heat on the soldering iron tip, thus avoiding damage to the soldering iron tip in the high temperature.
4. First let the cleaning sponge absorb enough water, then squeeze out the excess water, retaining seventy percent of the water, wipe the already heated soldering iron tip on the cleaning sponge a few times, and when you see the soldering iron tip reveal its glossy you can continue soldering. It is important to note that you should not use a dry soldering iron sponge directly to avoid static electricity or damage to the soldering iron tip.
5. It can be placed on the soldering iron stand and is suitable for all kinds of electrical/precision instrumentation soldering work.

Specification:
Color: Blue/Yellow
Size: 55mm*55mm/2.17inch*2.17inch
FabricsHigh Temperature Rresistant Sponge

Package Included:
10PCS*Soldering Iron Special High Temperature Sponges


ProductSiteLaunchDate : 2023-08-22T06:58:28.509Z
Size : 5.4X5.3CM
Style : centimeter
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SurfaceRecommendation : Metal
UnitCount : 50
UnspscCode : 47131600
Voltage : 656 volts
WarrantyDescription : 30 Day Warranty