Cart 2 india

Specification
Brand : Generic
BulletPoint : E-series Belt Fastener For Width 15mm Open-Ended Timing Belt Transmission For X/Y Axis Hardware Tools Machine Parts
BulletPoint1 : Tooth pitch=5.00mm Tooth width=2.65mm Belt thickness=2.20mm Tooth height=1.20mm
BulletPoint2 : Material=Polyurethane/PU Steel wire
BulletPoint3 : With good flexibility and flex fatigue resistance, high hardness, good strength, high elasticity, resistance to aging, oil resistance, wear resistance, etc.
BulletPoint4 : Stable, quiet, high precision, linear speed up to 80m/sec.
BulletPoint5 : Working temperature -30 degrees Celsius to 80 degrees Celsius, can withstand up to 110 degrees Celsius for a short time
Color : 15mm
CompatibleDevices : 3D Printer
CompatibleDevices1 : Print
CompatibleDevices2 : Vacuum Cleaner
CompatibleDevices3 : Treadmill
ExternallyAssignedProductIdentifier : 1201478120743
ExternallyAssignedProductIdentifier1 : 840249641998
ExternallyAssignedProductIdentifier2 : 0840249641998
IncludedComponents : Timing Belt
ItemName : TCHAO3D 10Pcs Steel Wire PU Closed Loop Timing Belts Width10/15/20mm Width 290 295 300 305 310 315 320 325 330 335 Polyurethane Belts (Length : T5-320, Width : 15mm)
ItemPackageDimensions_Height : 2.3 inches
ItemPackageDimensions_Length : 2.6 inches
ItemPackageDimensions_Width : 2.6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-timing-belts
Manufacturer : TONGCHAO-US
Material : Nylon
ModelNumber : 264-3M-20
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : CPPGZBTPC-T5-320-15MM
ProductDescription : Note for synchronous belt:
*Please note that the surface of the product is neat, the belt is not distorted and deformed, and the belt teeth are full.
*Bending is strictly prohibited to avoid damaging the skeleton material and affecting the belt strength.
*It is strictly forbidden to scratch the belt to avoid early damage to the belt.
*Try to avoid long-term contact with oil and water for a long time and avoid contact with chemicals.
*When replacing the synchronous belt, the tension of the belt must be reduced to the minimum before it can be taken out. It is strictly forbidden to use non-professional tools to pry down the synchronous belt hard when there is high tension.
ProductSiteLaunchDate : 2022-10-21T07:57:12.210Z
Size : T5-320
StreetDate : 2017-07-08T00:00:01Z
Style : 264-3M-20
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111800