Cart 2 india

Specification
Brand : Tenax
BulletPoint1 : From Tenax, an industry leader and innovator
BulletPoint2 : Comes with mixing tips
BulletPoint3 : Cures fast
BulletPoint4 : Non-Yellowing formula
BulletPoint5 : Perfect for commercial and industrial applications
Color : Heather Gray
CompatibleMaterial1 : Ceramic
CompatibleMaterial2 : Stone
ExternallyAssignedProductIdentifier1 : 0614042424290
ExternallyAssignedProductIdentifier2 : 614042424290
ItemForm : Liquid
ItemName : Heather Gray 316 Tenax GLAXS Fast Cartridge 215 ML - 2 Pack
ItemPackageQuantity : 1
ItemTypeKeyword : tile-epoxy-adhesives
ItemVolume : 215 milliliters
Manufacturer : Tenax
Material : glue
ProductDescription : Heather Gray 316 Tenax GLAXS Fast Cartridge 215 ML - 2 Pack

This is the Tenax GLAXS Fast Cartridge 215 ML - 2 Pack and it is an excellent product for providing maximum adhesion on your stone. GLAXS Fast 215 ml glue is made of two previously dosed components. The GLAXS Fast 215 ml is produced in a special cartridge ratio 2+1, with 2 tubes and a mixer which allows the correct extrusion of the product very easily. Once inserted in a proper gun with 2 pistons, the product is ready for use. Each cartridge comes with two mixing tips. GLAXS is suitable to glue and to mend: Stone; Marble; Granite; & Ceramics. GLAXS Fast 215 ml can also be used to glue together different materials such as: Marble to Marble; Marble to Granite; Stone to Ceramic and so forth. GLAXS is perfect for both indoor and outdoor use.

It also has a great shelf life: The products in cartridge will last at least 18 months in the pack and for 12 months out of pack-- in normal conditions between 18-25°c, kept away from sources of heat, humidity and sun light. The advantages of this product are manifold and it offers: Zero yellowing to sun rays; Excellent adhesion; No oily effect or shadow; Cures very fast at low temperatures too, +1°C; Pre-dosed, ready-to-use system; No mixing mistakes; Contains zero VOC! Instructions: All the surfaces to be treated must be cleaned and free of dust and grease.

In case of glossy and/or smooth surfaces, we suggest scrubbing the surfaces with sandpaper before gluing. Remove the threaded extremity and uncap the cartridge. Fix the mixer to the cartridge through the threaded nozzle. Before applying the glue on the surfaces, do spurge around 5 cm in line. Use only guns approved by TENAX, MK Sulzer ratio 2+1 H236M and Mixpac DM200-01 ratio 2+1. After usage, clean the nozzle, replace the cap and discard the mixer after use. Product will not set below +1°C.
ProductSiteLaunchDate : 2018-09-20T07:00:00.000Z
UnitCount : 2
UnspscCode : 31201600