Cart 2 india

Specification
Brand : SSC Controls
BulletPoint1 : TIG weld foot pedal upgrade with steel case and OEM quality components.
BulletPoint10 : Simple, intuitive layout of controls and features
BulletPoint2 : 7-pin plug and 25-ft cable for Everlast TIG welders (not for MTS).
BulletPoint3 : For units with a 22k to 25k (25,000-ohm) potentiometer. Not for units with a knob on the pedal, MTS welders, or lift TIG only.
BulletPoint4 : Press to activate gas contactor and increase amperage; release to turn off and activate afterflow.
BulletPoint5 : Made in USA. Certified to CSA and UL standards.
BulletPoint6 : Over Current indicator warns when duty cycle has been exceeded and interrupts welding/cutting
BulletPoint7 : OK-to-cut indicator lights up when minimum air pressure is present
BulletPoint8 : Renown arc stability for TIG/Stick functions
BulletPoint9 : All-in-one portability
Color : Green
DataTransferRate : 100 gigabits_per_second
ExternallyAssignedProductIdentifier1 : 682698826157
ExternallyAssignedProductIdentifier2 : 0682698826157
ExternallyAssignedProductIdentifier3 : 0840338514172
ExternallyAssignedProductIdentifier4 : 0600136285694
ExternallyAssignedProductIdentifier5 : 00840338514172
FinishType : Ground Finish
HardwareInterface : usb
Hazmat1 : MANUAL GROUNDING
Hazmat10 : DE_NoAir
Hazmat11 : EG_NoAir
Hazmat12 : ES_NoAir
Hazmat13 : FR_NoAir
Hazmat14 : GB_NoAir
Hazmat15 : IN_NoAir
Hazmat16 : IT_NoAir
Hazmat17 : JP_NoAir
Hazmat18 : MX_NoAir
Hazmat19 : NL_NoAir
Hazmat2 : UN9999
Hazmat20 : PL_NoAir
Hazmat21 : SA_NoAir
Hazmat22 : SE_NoAir
Hazmat23 : SG_NoAir
Hazmat24 : TR_NoAir
Hazmat25 : US_NoAir
Hazmat26 : ZA_NoAir
Hazmat3 : 3
Hazmat4 : AE_NoAir
Hazmat5 : AU_NoAir
Hazmat6 : BE_NoAir
Hazmat7 : BR_NoAir
Hazmat8 : CA_NoAir
Hazmat9 : CN_NoAir
IncludedComponents : 6 cut pieces (2"X6") Welding Coupons
ItemDisplayDimensions_Height : 0.06 inches
ItemDisplayDimensions_Length : 7 inches
ItemDisplayDimensions_Width : 0.06 inches
ItemDisplayWeight : 2 pounds
ItemName : SSC Controls C925-0725 TIG Foot Pedal, Everlast, Made in USA, 7-Pin Plug, 25k (25,000-Ohm Potentiometer), 25-ft Cable, TIG Welding Control
ItemPackageDimensions_Height : 4 inches
ItemPackageDimensions_Length : 10 inches
ItemPackageDimensions_Width : 10 inches
ItemPackageQuantity : 1
ItemShape : Cone
ItemTypeKeyword : tig-welding-equipment
Manufacturer : SSC Controls
Material : Brass
ModelName : Welding Plate Welding Coupons
ModelNumber : C925-0725
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : C925-0725
Pattern : 10N25S
PowerSourceType : Hand Powered
ProductDescription : C925-0725 TIG welding foot control pedal will upgrade your foot control for Everlast TIG welders with a 7-pin plug that use a 22k to 25k (25,000-ohm) potentiometer. Comes with 25-foot cable. The foot pedal plugs into the 7-pin receptacle on your welder. You can find the ohm value of the foot pedal’s potentiometer in your owner’s manual for your welder (or see below). Features heavy-duty steel housing, tough made-in-USA cable with added flexibility, low profile with wide base for stability and comfort, and industrial / continuous potentiometer resolution for better weld control. Simply press the pedal to activate the gas contactor and increase current; release the pedal to turn off the weld output and activate the afterflow cycle. Certified to CSA and UL standards. Backed by SSC’s one-year warranty and quality guarantee. Made in the USA by SSC Controls Company. -------- Note: When choosing your pedal, you will need to determine the ohm value needed for the potentiometer. Everlast uses 22k or 47k ohm pots in their pedals (also known as 25k and 50k). All pedals for the PowerTIG, PowerPro, and PowerArc welders bought after December 2015 should use a 22k pedal (SSC model C925-0725). Previous to that date, there is some variation in ohm value. You can check your owner’s manual to find the ohm value required. You can also disassemble the welder’s foot pedal to determine the markings on the rear of the potentiometer (if you currently have a pedal). For the 50k model, see SSC model C950-0725 instead of this one. If you aren’t sure, please contact SSC for assistance. -------- Also note: Will not work with models having a knob on the foot control. Will not work on welders that offer lift TIG only. Will not work with MTS welders, which requires a male plug on the foot pedal, not the female plug as shown. Check your welder to make sure the plug shown will be able to plug in.
ProductSiteLaunchDate : 2015-12-14T19:20:43.842Z
RecommendedUsesForProduct : Sharpening
Size : Stubby
SpecificUsesForProduct : Welding
Style : WP-26FV
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 12
Voltage : 240 volts