Specification Brand : brennan BulletPoint1 : Adapter for joining pipes with different types of connections BulletPoint2 : Male National Pipe Taper (NPT) threads on one end and female National Pipe Straight (NPS) threads on the other end BulletPoint3 : Made from stainless steel 316 for resistance to chloride corrosion BulletPoint4 : Higher corrosion resistance than stainless steel 304 BulletPoint5 : Meets SAE J514 standard for quality assurance Color : Silver ConnectorType : Adapter ConnectorType1 : Cap ConnectorType2 : Elbow ExteriorFinish : Stainless Steel ItemName : Brennan 1404-08-08-SS Stainless Steel Pipe Fitting, Adapter, 1/2" NPT Male X 1/2" NPS Female ItemPackageDimensions_Height : 4.445 centimeters ItemPackageDimensions_Length : 5.08 centimeters ItemPackageDimensions_Width : 4.445 centimeters ItemPackageQuantity : 1 ItemShape : Adapter ItemTypeKeyword : threaded-tube-fittings Manufacturer : Brennan Material : Stainless Steel Material1 : Plastic Material2 : Metal ModelNumber : 1404-08-08-SS NumberOfItems : 1 NumberOfPieces : 1 PartNumber : 1404-08-08-SS ProductDescription : Description: 1.Quick and simple installation,designed for using to connect with polyethylene, nylon and PU tubing. 2.Push-to-connect tube connection on one end and male G threads on the other end. 3.A good release cap can withstand greater and stronger pressure without tripping. 4.Have flexibility, abrasion resistance, light weight, and resistance to crushing and cracking,Compressive and corrosion resistant, good sealing performance and long service life. 5.Easy to install, insert the plastic tube, the cap can be rotated freely, but its rotation is only used when the angle is wrong when the joint is installed.
Product Features: Product Name : Connect Fitting Model : MPL4-01 Color : Black Material : Plastic,Metal Type: 90 Deg Swivel Elbow Male Connector Thread Size :1/8 NPT Tube Size (OD) : 4mm / 5/32" Operating Pressure : 0-1MPa Operating temperature:-10 - 60 Degree Celsius Dimension : 30mm x 23mm / 1.18-inch x 0.91-inch(L x W )
Package Content: 1pcs x Fitting Mounted: 1.Cut the pipe flat, no slope 2.When inserting the pipe into the joint, it must be inserted into the end, otherwise there may be a leak. 3.After plugging in, try to pull the tube, if you can't pull it out, it means it has been connected. 4.When loosening the tube, first confirm that there is no pressure in the tube, and then evenly press the end cap to the bottom.