Specification Brand : SASKATE BulletPoint1 : Stainless Steel Blades: All 52 blades are made of stainless steel, which is not easy to , ensuring the accuracy of measurement. BulletPoint2 : Application: The center is used to grind and position thread cutting tools on a lathe, and is usually used to check the thread size to determine whether it is correct. BulletPoint3 : Tool Angle Can be Checked: When cutting threads on a metal lathe, the tool angle can be checked to confirm the angle of the thread cutting tool of the V trough of the instrument. BulletPoint4 : Basic Specifications: There are 24 blades in metric, and the pitch of each blade is 0.25‑6mm. There are 28pcs in imperial, and each piece is represented by the number of teeth per inch from 4‑62 teeth. BulletPoint5 : Special Measuring Tool: Pitch is a special measuring tool that stacks multiples of the pitch, and is used to check the thread pitch. Color : Black ExternallyAssignedProductIdentifier1 : 0658360145376 ExternallyAssignedProductIdentifier2 : 658360145376 IncludedComponents : 44pcs Nut and Bolt Thread Checker*1 ItemDisplayWeight : 1.9 pounds ItemName : Silver Centre Gauge, 52 Blades Metric Imperial Pitch Measuring Tool with 0.25-6mm Range and 4-62 Teeth, Thread Size Checker for Lathe ItemPackageDimensions_Height : 2 centimeters ItemPackageDimensions_Length : 12 centimeters ItemPackageDimensions_Width : 8 centimeters ItemTypeKeyword : thread-gauges Manufacturer : SASKATE Material : stainless steel MeasurementAccuracy : ±0.02 mm ModelName : Saskatep2awvrc69x ModelNumber : SASKATEp2awvrc69x NumberOfBoxes : 1 NumberOfItems : 1 PartNumber : SASKATEp2awvrc69x ProductDescription : Specification: Item Type: Thread Pitch Cutting Gauge Material: Stainless Steel Purpose: Used to Check the Thread Size to Determine Whether is Correct Colour: Silver Number of Blades: 52 Neutral Angle: 55°, 60° Blade Description: There are 24pcs in metric, according to the pitch of each piece, the pitch is 0.25-6mm. The number of pitches is: 0.25/0.3/0.35/0.4/0.45/0.5/0.6/0.7/0.75/0.8/0.9/1.0/1.25/1.5/1.75/2.0/2.5/3.0/2.5/3. 3.5/4.0/4.5/5.0/5.5/ 6.00 There are 28pcs in imperial, and each piece is represented by the number of teeth per inch from 4-62 teeth, especially as the number of teeth: 4/4.5/5 /6/7/8/9/10/11/12/13/14/16/ 18/19/20/22/24/25/26/30/28/32/36/40/48/60/62
How to Use: 1) Measure pitch Use the thread pilot group as a template to clamp the toothed steel threads on the tested workpiece. If not close together, the other is one until they fit together. Then marked on the thread size model is the measured thread pitch of the workpiece. 2) Measure tooth contour angle Test the thread pitch and the thread model of the tested workpiece on the same thread, and then check the Thalia . If there is no interval translucent, the thread contour angle of the tested thread is correct; if there is uneven light interval, means the measured The thread contour is inaccurate.
Package List: 1 x Thread Pitch Gauge 3 x Neutral Gauge ProductSiteLaunchDate : 2025-03-13T10:49:28.136Z Size : 42.90X9.90X1.90CM Style : Modern SupplierDeclaredDgHzRegulation : not_applicable UnitCount : 1