Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Metric Spiral Point Taps: Thread size: M2 x 0.4, M2.5 x 0.45, M3 x 0.5, M3.5 x 0.6, M4 x 0.7, M5 x 0.8, M6 x 1.0; plug chamfer and right hand thread cutting. Straight flutes are ground to provide provide downward chip removal, with clear threads and sharp cutting edges.
BulletPoint2 : Material & Finish: 6542 (M2) high speed steel metric taps run at high speeds and generate threads quickly and efficiently, offering high hardness (HRC62-64), wear resistance, and good toughness. Titanium coating for improving wear resistance, hardness, heat resistance, lubricity.
BulletPoint3 : Applications: Thread taps are great for through-hole threads. Can be used for drilling and tapping stainless steel, aluminum, alloy steel, ordinary steel, cast iron, non-ferrous metals, hard plastics, etc. Flutes on the screw tap help to remove chips and debris from the hole.
BulletPoint4 : Machine Tap: Suitable for drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
BulletPoint5 : Tips: Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Drill the holes with a twist drill bit first, then tap with a thread tap. Micro taps (such as M1-M3.5) are mainly used for clocks, watches, low-hardness woods, and soft metals.
Color : Gold
CuttingAngleString : 45.0 degrees
ExternallyAssignedProductIdentifier1 : 0753318615274
ExternallyAssignedProductIdentifier2 : 753318615274
FinishType : Titanium Coated
GpsrSafetyAttestation : 1
IncludedComponents : Thread Taps Set
ItemDisplayWeight : 1.12 pounds
ItemName : uxcell 7pcs Spiral Point Tap Set M2 M2.5 M3 M3.5 M4 M5 M6 Metric Thread Screw Taps, Titanium Coated High Speed Steel 6542 Machine Tapping Threading Repair Tool
ItemPackageDimensions_Height : 8.89 centimeters
ItemPackageDimensions_Length : 1.397 centimeters
ItemPackageDimensions_Width : 5.9944 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : thread-milling-taps
Manufacturer : uxcell
Material : High Speed Steel 6542 (M2)
MeasurementSystem : Metric
ModelName : M2 M2.5 M3 M3.5 M4 M5 M6
ModelNumber : F0060
NumberOfBoxes : 1
NumberOfFlutes : 1
NumberOfPieces : 7
PartNumber : a24013000ux0320
PowerSourceType : hand_powered
ProductDescription : Thread Size: M2 x 0.4, M2.5 x 0.45, M3 x 0.5, M3.5 x 0.6, M4 x 0.7, M5 x 0.8, M6 x 1.0
Square Shank Width: 2.3mm / 0.09" , 2.3mm / 0.09", 3.1mm / 0.12", 3.1mm / 0.12", 3.86mm / 0.15", 3.95mm / 0.16", 4.6mm / 0.18"
Thread Length: 9mm / 0.35", 11.5mm / 0.45", 14mm / 0.55", 15mm / 0.6", 15mm / 0.6", 18.5mm / 0.73", 22mm / 0.87"
Total Length: 43mm / 1.69", 47mm / 1.85", 50mm / 1.97", 56mm / 2.2", 56mm / 2.2", 62mm / 2.44", 67.5mm / 2.66"
Material: HSS 6542 (High Speed Steel 6542)
Finish: Titanium Coated
1 Set (7pcs) x Spiral Point Thread Taps

Descriptions:
1. Metric thread tap features spiral point, plug chamfer and right hand thread cutting. Straight flutes are ground to provide downward chip removal. The point of the tap helps guide it into the hole and reduces the torque required to turn it.
2. High-speed steel tapping tool is great for general purpose applications, offering high hardness and toughness. Titanium coating for improving wear and fusion resistance, long service life.
3. Spiral point tap is suitable for through-hole threads. Can be used for drilling and tapping stainless steel (below 30HRC), aluminum, die steel, ordinary steel, non-ferrous metals, and hard plastics. Flutes help to remove chips and debris from the hole.
4. Machine threading tap is used with drill presses, tapping machines, CNC and milling machines. Used with tapping oil to get higher quality threads and more durable taps. The tapping depth should not exceed 1.5 times the diameter of screw tap.
5. Machine taps are suggested to be used with tap chucks with overload protection. It is not recommended for hand use and electric drill tapping. Drill the holes with a twist drill bit first, then tap with a thread tap. The tapping angle should be 90 degrees vertical and stable.
ProductSiteLaunchDate : 2024-03-06T10:10:26.630Z
Size : M2 M2.5 M3 M3.5 M4 M5 M6
SpecificUsesForProduct : Machine Tapping
Style : Spiral Point Tap
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Aluminum,Plastic,Steel,Wood
UnitCount : 7
UnspscCode : 27111700